Alternatives and similar repositories for I3CBlaster

Users that are interested in I3CBlaster are comparing it to the libraries listed below

• CRImier / AltmodeFriend
  Altmode Friend code, STEP and other files
  ☆36Updated last year
• holysnippet / pico_eth_doc
  RP2040 Minimal hardware (PIO) Ethernet interface + LwIP TCP/IP stack driver
  ☆113Updated 2 years ago
• benedekkupper / stm32-i2c-hid
  HID over I2C demonstration
  ☆43Updated last month
• Jana-Marie / analog-toolkit
  A smol and simple STM32G431 based Analog to USB toolkit.
  ☆67Updated last year
• adafruit / u2if
  USB to interfaces implementing MicroPython "machine" module functionalities on a computer.
  ☆31Updated 9 months ago
• jaydcarlson / py32-template
  ☆90Updated last year
• Diodes-Delight / Piunora-Hardware
  Design files and schematic for Piunora
  ☆52Updated last year
• tvlad1234 / Pico-10BASE-T-Library
  Library which allows the Pi Pico to send UDP packets over 10BASE-T Ethernet
  ☆10Updated 3 years ago
• timonsku / M.2-Card-Footprints
  Footprints and template for making your own M.2 devices
  ☆113Updated 2 months ago
• Aylo6061 / PDHV
  ☆34Updated 2 years ago
• gamblor21 / rp2040-logic-analyzer
  Using a RP2040 Pico as a basic logic analyzer, exporting CSV data to read in sigrok / Pulseview
  ☆92Updated 4 years ago
• tinkerbeast / PicoSigGen
  PicoSigGen - Low cost arbitrary waveform generator
  ☆31Updated 2 years ago
• joeltroughton / nanoAmmeter
  A small ammeter for measuring printed glucose biosensors
  ☆26Updated 4 years ago
• openwch / ch34x
  CH340, CH343, CH342, CH344,CH348
  ☆36Updated 2 years ago
• lonehog / JTAGprobe
  Firmware for Raspberry Pico to work as JTAG debugger using OpenOCD
  ☆63Updated 7 months ago
• adafruit / PrettyPins
  ☆87Updated last month
• rgrr / yapicoprobe
  Yet Another Picoprobe
  ☆170Updated last week
• essele / pico_debug
  A fast flasher/debugger for RP2040 based devices (runs on Raspberry Pi Pico)
  ☆81Updated last year
• 8086net / pico-sexa-uart-bridge
  Raspberry Pi Pico UART-USB-I2C bridge (USB to six UARTs and one I2C)
  ☆64Updated 7 months ago
• Tengo10 / pinout-overview
  A simple Python tool to create pinout overviews of ICs.
  ☆34Updated last year
• slimelec / ollie-hw
  ☆72Updated 3 years ago
• gregdavill / KiZip
  KiCad Plugin to package gerbers ready for ordering
  ☆36Updated 3 years ago
• wasspaul / sig_gen
  A simple cost-effective demo, test, training, board for an oscilloscope made from a Raspberry Pi Pico
  ☆59Updated 10 months ago
• pmarques-dev / PicoEncoder
  High resolution quadrature encoder using the PIO on the RP2040
  ☆61Updated 5 months ago
• MatthiasElectronic / AWG_DHO8-900
  artificial waveform generator / function generator for DHO800 and DHO900 series (AWG/AFG)
  ☆94Updated last month
• steve-m / hsdaoh-rp2350
  High Speed Data Acquisition over HDMI - RP2350 HSTX implementation
  ☆200Updated 5 months ago
• jjsch-dev / pico_i2c_sniffer
  i2c sniffer with a Raspberry Pi Pico
  ☆90Updated 4 years ago
• m1geo / Pi5_PCIe
  A crude reverse engineering of the Pi5 PCIe connector & potential breakout boards.
  ☆80Updated last year
• eeucalyptus / ch32v003-usbpd
  Use the ch32v003 as a usb pd controller
  ☆46Updated last year
• openwch / ch32x035
  32-bit RISC-V MCU CH32X035 built-in USB PD PHY
  ☆65Updated last month