Alternatives and similar repositories for JTAGprobe

Users that are interested in JTAGprobe are comparing it to the libraries listed below

• tvlad1234 / Pico-10BASE-T-Library
  Library which allows the Pi Pico to send UDP packets over 10BASE-T Ethernet
  ☆10Updated 2 years ago
• zeldin / fx3lafw
  Blob-free logic analyzer firmware for FX3
  ☆83Updated 2 years ago
• 8086net / pico-sexa-uart-bridge
  Raspberry Pi Pico UART-USB-I2C bridge (USB to six UARTs and one I2C)
  ☆63Updated 6 months ago
• mwelling / rp2040-pmod
  RP2040 MCU based PMOD
  ☆20Updated 10 months ago
• circuitvalley / Intel_FPGA_Board_98Y2610
  This Repo has Files related to reverse engineering of IBM 98Y2610 Intel Cyclone IV
  ☆67Updated 10 months ago
• DangerousPrototypes / BusPirate5-hardware
  Bus Pirate Hardware and accessories for v5 and higher
  ☆77Updated 3 months ago
• Tengo10 / pinout-overview
  A simple Python tool to create pinout overviews of ICs.
  ☆34Updated last year
• eeucalyptus / ch32v003-usbpd
  Use the ch32v003 as a usb pd controller
  ☆46Updated last year
• dougg3 / CH55x-USB-Blaster
  Fork of CH55x-USB-Blaster firmware that runs on cheap USB Blaster I got on Amazon
  ☆36Updated 9 months ago
• aappleby / picorvd
  GDB-compatible RISC-V Debugger for CH32V003 that runs on a Raspberry Pi Pico
  ☆222Updated 8 months ago
• holysnippet / pico_eth_doc
  RP2040 Minimal hardware (PIO) Ethernet interface + LwIP TCP/IP stack driver
  ☆109Updated 2 years ago
• steve-m / hsdaoh-rp2350
  High Speed Data Acquisition over HDMI - RP2350 HSTX implementation
  ☆172Updated 4 months ago
• xyphro / I3CBlaster
  Raspberry pico / RP2040 based USB to I3C converter with Python support
  ☆71Updated last month
• esden / bitmagic
  Open Source Logic Analyzers and data Syphons
  ☆81Updated 3 years ago
• Jana-Marie / analog-toolkit
  A smol and simple STM32G431 based Analog to USB toolkit.
  ☆67Updated last year
• GMMan / st-link-hack
  An exploration into unsafely written code
  ☆74Updated 2 years ago
• lundmar / riscv-gd32vf103-demo
  Simple demo firmware for the RISC-V GD32VF103
  ☆29Updated 4 years ago
• kholia / Colorlight-5A-75B
  Notes for Colorlight-5A-75B.
  ☆48Updated 10 months ago
• kprasadvnsi / riscv-openocd-wch
  OpenOCD source code for CH32V series MCUs released by Mounriver IDE
  ☆55Updated 3 years ago
• elehobica / pico_spdif_rx
  S/PDIF receiver library for Raspberry Pi Pico series
  ☆96Updated 4 months ago
• openwch / ch569
  SDK sch&layout reference design and datasheet documention
  ☆64Updated last year
• azonenberg / voltage-divider-calculator
  Tool for selecting voltage divider components given constraints and a list of available resistors
  ☆35Updated 2 years ago
• jaydcarlson / py32-template
  ☆90Updated last year
• atc1441 / chflasher
  ☆29Updated 5 years ago
• racerxdl / stm32f0-pico-dump
  STM32F0x Protected Firmware Dumper with Raspberry Pi Pico
  ☆173Updated last year
• wuxx / nanoCH32V003
  ☆83Updated 4 months ago
• jjsch-dev / pico_i2c_sniffer
  i2c sniffer with a Raspberry Pi Pico
  ☆89Updated 4 years ago
• ArcaneNibble / wch-uf2
  CH32V UF2 bootloader
  ☆51Updated last year
• gamblor21 / rp2040-logic-analyzer
  Using a RP2040 Pico as a basic logic analyzer, exporting CSV data to read in sigrok / Pulseview
  ☆90Updated 4 years ago
• hydrausb3 / hydrausb3_fw
  HydraUSB3 (WCH CH569) open source test firmware / examples / libraries to experiment with streaming / high-speed protocols (USB2 HS, USB3…
  ☆83Updated 2 years ago