Alternatives and similar repositories for ASM2464PD-test

Users that are interested in ASM2464PD-test are comparing it to the libraries listed below

• will127534 / PCIe3_Hub
  A opensource PCIe 3.0 Hub design based on ASM2806 with Raspberry Pi 5's PCIe FPC connector design
  ☆76Updated 10 months ago
• lonehog / JTAGprobe
  Firmware for Raspberry Pico to work as JTAG debugger using OpenOCD
  ☆61Updated 6 months ago
• CRImier / AltmodeFriend
  Altmode Friend code, STEP and other files
  ☆36Updated last year
• steve-m / hsdaoh-rp2350
  High Speed Data Acquisition over HDMI - RP2350 HSTX implementation
  ☆172Updated 4 months ago
• esden / bitmagic
  Open Source Logic Analyzers and data Syphons
  ☆81Updated 3 years ago
• openwch / ch569
  SDK sch&layout reference design and datasheet documention
  ☆64Updated last year
• CentyLab / AP33772-Cpp
  Hardware independent code for AP33772. Originally written for PicoPD
  ☆23Updated 5 months ago
• m1geo / Pi5_PCIe
  A crude reverse engineering of the Pi5 PCIe connector & potential breakout boards.
  ☆78Updated last year
• voltlog / emmc-wfbga153-microsd
  eMMC WFBGA153 to microSD card adapter PCB
  ☆64Updated last year
• xyphro / I3CBlaster
  Raspberry pico / RP2040 based USB to I3C converter with Python support
  ☆71Updated last month
• antmicro / m2-pcie-adapter
  Adapter card exposing M.2 (key-M) signals on PCIe x4 card edge socket.
  ☆40Updated last year
• CRImier / NGFF
  M.2 NGFF接口标准
  ☆27Updated 3 years ago
• timonsku / M.2-Card-Footprints
  Footprints and template for making your own M.2 devices
  ☆112Updated last month
• mwelling / rp2040-pmod
  RP2040 MCU based PMOD
  ☆20Updated 10 months ago
• amaranth-farm / ch569-hspi-fpga
  Gateware to communicate with the high speed parallel interface (HSPI) of the CH569 with a FPGA
  ☆32Updated 3 years ago
• hydrausb3 / hydrausb3_fw
  HydraUSB3 (WCH CH569) open source test firmware / examples / libraries to experiment with streaming / high-speed protocols (USB2 HS, USB3…
  ☆83Updated 2 years ago
• jmwilson / oshw-active-probe
  2GHz single-ended active probe design
  ☆139Updated last year
• circuitvalley / Intel_FPGA_Board_98Y2610
  This Repo has Files related to reverse engineering of IBM 98Y2610 Intel Cyclone IV
  ☆67Updated 10 months ago
• steve-m / hsdaoh-fpga
  High Speed Data Acquisition over HDMI - FPGA implementation
  ☆47Updated 6 months ago
• hydrausb3 / wch-ch56x-bsp
  WCH CH56x BSP for HydraUSB3 v1 hardware
  ☆17Updated last year
• greatscottgadgets / apollo
  microcontroller-based FPGA / JTAG programmer
  ☆79Updated 9 months ago
• jmgao / kicad-ngff
  NGFF (M.2) edge connector footprints and symbols for KiCAD
  ☆40Updated 5 years ago
• a-little-wifi / mxm-immobilizer
  MXM to PCIe adapter
  ☆53Updated 9 months ago
• devbisme / WireIt
  KiCad PCBNEW plugin that lets you add wires between pads on a PCB, delete them, and swap wires between pads.
  ☆85Updated 7 months ago
• Tengo10 / pinout-overview
  A simple Python tool to create pinout overviews of ICs.
  ☆34Updated last year
• CentyLab / PicoPD
  Repo for PicoPD hardware/software and documentation
  ☆56Updated 10 months ago
• hydrausb3 / hydrausb3_hw
  HydraUSB3 V1 is an open source developer kit for the WCH CH569 MCU to experiment with streaming / high-speed protocols(USB2 HS, USB3 SS, …
  ☆37Updated last year
• gregdavill / KiZip
  KiCad Plugin to package gerbers ready for ordering
  ☆36Updated 3 years ago
• openwch / ch32x035
  32-bit RISC-V MCU CH32X035 built-in USB PD PHY
  ☆65Updated last week
• notro / pico-usb-io-board
  Raspberry Pi Pico USB I/O Board
  ☆80Updated 2 years ago