Alternatives and similar repositories for pynmeagps

Users that are interested in pynmeagps are comparing it to the libraries listed below

• semuconsulting / pyubx2
  Python library for parsing and generating UBX GPS/GNSS protocol messages.
  ☆240Updated last month
• mayeranalytics / pyUBX
  Python library for parsing/generating u-blox UBX protocol messages, and for creating parsers/generators in other languages.
  ☆90Updated 4 years ago
• semuconsulting / pygnssutils
  Python GNSS CLI utility library for reading, parsing and broadcasting NMEA, UBX, SBF, QGC, RTCM3, NTRIP and SPARTN protocols
  ☆129Updated 3 weeks ago
• semuconsulting / pyrtcm
  Python library for parsing RTCM 3 protocol messages.
  ☆106Updated last month
• semuconsulting / PyGPSClient
  Python Graphical GPS Client Application supporting NMEA, UBX, SBF, QGC, RTCM3, NTRIP & SPARTN Protocols
  ☆757Updated 3 weeks ago
• Korving-F / ublox
  Python library for the UBX protocol
  ☆37Updated 5 years ago
• sparkfun / SparkFun_RTK_Firmware
  Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
  ☆102Updated last month
• septentrio-gnss / mosaicHAT
  Mosaichat: an open source Raspberry Pi HAT based on Septentrio's mosaic-X5
  ☆56Updated last year
• u-blox / ublox-C099_F9P-uCS
  ☆62Updated 5 years ago
• goblimey / ntripcaster
  Docker file and instructions to build and run the BKG NTRIP caster
  ☆124Updated last year
• tridge / pyUblox
  python Ublox module
  ☆105Updated 2 years ago
• dalymople / ubxtranslator
  A simple python parser for UBX messages
  ☆26Updated last year
• taroz / GNSS-Radar
  GNSS-Radar is a web application to show the current GNSS constellation
  ☆94Updated 11 years ago
• jacobjhansen / RTCM-Pi
  GNSS Base Station based on Raspberry Pi 4B
  ☆50Updated 2 years ago
• sparkfun / SparkFun_u-blox_GNSS_v3
  An Arduino library which allows you to communicate seamlessly with u-blox GNSS modules using the Configuration Interface
  ☆93Updated last week
• emlid / ReachView
  Reach-hosted web-interface for RTKLIB
  ☆58Updated 6 years ago
• jcmb / NTRIP
  NTRIP, VRS, IBSS Tools
  ☆46Updated 2 months ago
• PaulZC / F9P_RAWX_Logger
  A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …
  ☆34Updated 5 years ago
• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆61Updated last year
• tomojitakasu / PocketSDR
  ☆423Updated 8 months ago
• sparkfun / SparkFun_Ublox_Arduino_Library
  Library to control UBX binary protocol and NMEA over I2C on Ublox GPS modules
  ☆148Updated 4 years ago
• Knio / pynmea2
  Python library for parsing the NMEA 0183 protocol (GPS)
  ☆674Updated 3 weeks ago
• ardusimple / simpleRTK2B
  Useful code to work with Ardusimple simpleRTK2B application board
  ☆37Updated 4 years ago
• sparkfun / SparkFun_RTK_Everywhere_Firmware
  Centimeter precision GPS/GNSS using L1/L2/L5 signals broadcast over Bluetooth, WiFi, and Ethernet.
  ☆46Updated this week
• harshadms / galileo-sdr-sim
  Galileo E1B/C Signal Generator
  ☆56Updated last year
• jcmb / RTCM3
  Obsolete System for Parsing RTCM3.x packets
  ☆45Updated 6 years ago
• Ericsson / SUPL-3GPP-LPP-client
  This project is a set of libraries, examples and tools to facilitate the development of 3GPP LPP clients.
  ☆32Updated 3 weeks ago
• swift-nav / peregrine
  Peregrine software GNSS receiver.
  ☆61Updated 4 years ago
• taroz / TouchRTKStation
  Single-Frequency RTK-GNSS Rover/Base Station based on RTKLIB
  ☆98Updated 6 years ago
• carlesfernandez / gnss-sdr
  Development repo of GNSS-SDR, an open source GNSS software defined receiver. You are probably looking for https://github.com/gnss-sdr/gns…
  ☆54Updated this week