lupyuen / hynitron_i2c_cst0xxse
Reference code for Hynitron CST816S Touch Controller
☆14Updated 4 years ago
Related projects: ⓘ
- Programming tool for Bouffalo Labs BL602/BL604 chips☆24Updated 3 years ago
- OpenBouffalo Firmware Repository☆33Updated last year
- Interrupt driven variant of libopencm3's usb_cdcacm example.☆16Updated 6 years ago
- A firmware for the PineTime☆9Updated 3 years ago
- ☆15Updated 2 months ago
- Implementation of SWD protocol with Raspberry Pi Bidirectional SPI☆14Updated 4 years ago
- Open source firmware for the SMA-Q2 smart watch☆67Updated 3 years ago
- OpenOCD that supports SWD over SPI on Raspberry Pi☆45Updated 2 years ago
- Documentation of the BL602 IC☆65Updated last year
- PineTime Watch Face Simulator with LVGL ported to WebAssembly☆15Updated 3 years ago
- ☆25Updated 4 years ago
- A SUMP compatible Logical Analyser for the STM32F4☆26Updated 8 years ago
- Using the ch32v003 as a temperature sensor☆15Updated 10 months ago
- Full-featured command-line shell interface☆28Updated 3 years ago
- Linux kernel source tree☆11Updated last year
- Getting familar with the Sipeed Longan Nano board☆21Updated 2 years ago
- STM32 related gubbins☆15Updated 8 years ago
- Opensource toolchain for BL602/BL604, BL702/BL704/BL706, BL616/BL618, BL808 and other series of RISC-V based chips from Bouffalo Lab☆16Updated last year
- ☆17Updated 3 years ago
- Linux kernel framebuffer driver for Waveshare E-Ink displays☆15Updated 5 years ago
- STM8S headers patched for SDCC☆10Updated 4 years ago
- attempt for ESP32 to connect to WiFi AP and provide PPP tunnel to serial RX/TX☆23Updated 3 years ago
- Minimal code for a 'bare metal' ESP32 program which does not use ESP-IDF. Really just a learning exercise because the ESP-IDF is Apache-l…☆43Updated 5 years ago
- A curated list of tooling, documentation and other resources for Bouffalo Lab chips☆56Updated 2 years ago
- Smaller standard C libraries for embedded platforms. Based on https://keithp.com/cgit/newlib.git☆13Updated 5 years ago
- Farpatch debugger software layer, backed by Black Magic☆39Updated 2 weeks ago
- Buildroot for ido-som2d01 (and similar SSD20xD) based boards.☆10Updated last year
- Evaluation board for Allwinner V3s☆13Updated 6 years ago
- A small Black Magic Probe based on the pinout of the STLink V2 support firmware☆33Updated 5 years ago
- Use SWD debugging over USB-C debug accessory mode☆27Updated 8 months ago