Alternatives and similar repositories for pcb

Users that are interested in pcb are comparing it to the libraries listed below

• jsphuebner / inverter-hardware
  Eagle schematics of inverter main board, sensor boards and gate drivers
  ☆71Updated 3 years ago
• geolink / opentracker-hardware
  OpenTracker PCB related files
  ☆16Updated 7 years ago
• jsphuebner / stm32-template
  Empty Openinverter project to start your own
  ☆15Updated last year
• fredcooke / FreeMS2
  Free and Open Source MegaSquirt 2 Firmware
  ☆16Updated 12 years ago
• casainho / Lebowski-controller-IC
  ARCHIVE: Lebowski controller IC 2.A1 source code and (short) explanation
  ☆18Updated 5 years ago
• Tjeerdie / Peak-And-hold-Driver
  Peak and hold injector driver for low-Z injectors.
  ☆14Updated 2 years ago
• damienmaguire / Tesla-Model-3-Drive-Unit
  Open Source logic board for the Tesla Model 3 rear drive unit. PCB Files in DesignSpark 8 format.
  ☆64Updated last month
• BretStateham / arduino-ecu-simulator
  Arduino ECU Simulator
  ☆20Updated 6 years ago
• collin80 / GEVCU
  Generalized Electric Vehicle Control Unit
  ☆117Updated 3 years ago
• marcinbor85 / can-prog
  Command-line tool to flashing devices by CAN-BUS
  ☆85Updated 5 years ago
• damienmaguire / Stm32-vcu
  A Vehicle Control Unit for Electric Vehicle Conversion Projects based on an STM32F107. Software based on the Openinverter Project.
  ☆179Updated this week
• damienmaguire / Tesla-Front-Drive-Unit
  Open Source Logic board to control the Tesla Model S Front Drive Unit
  ☆51Updated 3 years ago
• SeeedDocument / USB-CAN-Analyzer
  ☆116Updated last year
• jsphuebner / stm32-car
  Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus
  ☆61Updated 4 months ago
• AmesisProject / 002-Amesis-Throttle_To_ThrottleBody_Arduino
  Order a motorized throttle body for gasoline engines with an electronic pedal and an arduino Commander un boitier papillon motorisé des m…
  ☆14Updated last month
• pms67 / BananaSchplit-MiniUSBC
  Tiny USB-C PD split-rail power supply.
  ☆25Updated 2 years ago
• jsphuebner / stm32-sine
  Main firmware of the Huebner inverter project
  ☆176Updated 2 months ago
• DieBieEngineering / DieBieMS-Firmware
  Firmware for the DieBieMS
  ☆55Updated 4 years ago
• aeonSolutions / AeonLabs-AI-Volvo-MKII-Open-Hardware
  Volvo MKII Open Hardware
  ☆145Updated 9 months ago
• karlyamashita / common_libraries
  These are reusable libraries. You'll need to include the LSP.h file and remove comment for what you need.
  ☆30Updated 3 weeks ago
• collin80 / GEVCU6
  Generalized Vehicle Control Unit for version 6 boards
  ☆25Updated last year
• karlyamashita / CANable_USB_CAN
  Open source project that uses the CANable hardware from protofusion.org
  ☆40Updated 3 weeks ago
• scttnlsn / bms
  Battery management system for 4-series li-ion packs
  ☆59Updated 4 years ago
• geosmall / UAVCAN-for-STM32-Arduino
  UAVCAN for STM32 Arduino
  ☆42Updated 5 years ago
• pms67 / MPU6050_Breakout
  ☆23Updated 3 years ago
• davidmolony / MESC_FOC_ESC
  MESC, Molony ESC, STM32F303 based FOC+BLDC ready, HALL, Encoder, Sensorless, single sides, 2 layer, ~90A @48V
  ☆48Updated 4 years ago
• Pat-I / OpenGrade3D
  3D grade control
  ☆10Updated 3 months ago
• pazi88 / 8Ch-EGT
  8Ch EGT sensor board to be used with aftermarket ECUs
  ☆33Updated last year
• damienmaguire / Lexus-GS450H-Inverter-Controller
  Opensource controller for the Lexus GS450H Hybrid inverter and gearbox
  ☆21Updated 4 years ago
• jsphuebner / esp32-web-interface
  ☆19Updated 5 months ago