pmarches / masterbus-esp32
Reverse engineering of the masterbus protocol used by mastervolt products.
☆16Updated 2 years ago
Alternatives and similar repositories for masterbus-esp32:
Users that are interested in masterbus-esp32 are comparing it to the libraries listed below
- Inherited object for use NMEA2000 library for Arduino Boards with MCP2515 CAN bus controller.☆20Updated 3 years ago
- An Actisense NGT-1 compatible NMEA 2000 USB gateway for the SH-ESP32☆31Updated last year
- Inherited object for use NMEA2000 with ESP32 boards☆71Updated 5 months ago
- Sailor Hat for ESP32 hardware☆45Updated 2 months ago
- An ESP32 based gateway to send NMEA2000 PGNs to a SignalK server via WLAN or USB-Serial.☆19Updated 2 years ago
- Material für den NMEA2000-Workshop.☆36Updated last year
- Open-source electronics for your boat☆47Updated 4 years ago
- CAN_Interface for ESP32 (Cannelloni Protocol)☆52Updated 3 years ago
- This repository shows how to use the M5Stack as NMEA 2000 Display and WiFi Gateway.☆36Updated 2 years ago
- This is the develoment space for a NMEA 2000 Voyage Data Recorder based on an ESP32 with CAN bus and SD card. The logger is using a SN65H…☆26Updated 3 years ago
- Digital compass acting as B&G Precision 9 based on ESP32 and CMPS14☆18Updated 4 months ago
- SimpBMS Documentation☆85Updated 2 years ago
- nmea2000 gateway with ESP32☆70Updated last month
- Open-source electronics for your boat☆18Updated 4 years ago
- J1772 Hydra for Arduino☆16Updated 5 years ago
- To measure battery voltage, engine RPM, fuel level and exhaust teperature with an ESP32 and send it to a NMEA 2000 network.☆55Updated 2 years ago
- ☆18Updated 6 months ago
- An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.☆15Updated last year
- To measure temperature and barometric pressure with a BMP280 sensor and send it to NMEA2000 network.☆13Updated last year
- Automatically exported from code.google.com/p/simple-evse☆43Updated 9 years ago
- CAN bus to MQTT bridge with extensive parametrization for translation between CAN message and MQTT topic and payload string☆10Updated 8 years ago
- Arduino project to control webasto heater via W-bus☆40Updated 6 years ago
- A driver for the NMEA2000 library and standard linux socketCAN devices☆30Updated 4 years ago
- Simple CAN-over-IP gateway☆24Updated last year
- Hardware circuit diagram for interfacing to the Webasto WBUS interface from a PC/Arduino☆21Updated 5 years ago
- CAN driver project for the Espressif ESP32☆27Updated 3 years ago
- ANT BMS (antBMS) control panel on C# with UART capability. I hacked protocol and reverse-engineered it.☆22Updated 4 years ago
- Universal Signal K sensor framework for the ESP32 platform☆163Updated 3 weeks ago
- Plugin to convert Signal K to NMEA2000☆22Updated 2 weeks ago
- ☆16Updated 10 months ago