Alternatives and similar repositories for SMAVenusDriver

Users that are interested in SMAVenusDriver are comparing it to the libraries listed below

• kwindrem / VeCanSetup
  Manages Victrion VenusOs VeCan (aka CANbus) ports
  ☆50Updated last month
• Frankkkkk / python-pylontech
  Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485
  ☆75Updated last year
• Tobi177 / venus-chargerybms
  Driver to embed the Chargery BMS to a Venus OS device
  ☆33Updated last year
• syssi / esphome-seplos-bms
  ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART or RS485
  ☆94Updated last week
• juamiso / PYLON_EMU
  Python script to emulate the outgoing CAN bus traffic from a Pylontech LFP battery pack (48V)
  ☆44Updated 3 years ago
• freakent / dbus-mqtt-devices
  A driver for Victron VenusOS GX devices to support use of dbus-mqtt/flashmq-mqtt
  ☆135Updated last week
• victronenergy / dbus-flashmq
  Plugin for FlashMQ that interfaces between DBUS and MQTT.
  ☆52Updated 3 weeks ago
• irekzielinski / Pylontech-Battery-Monitoring
  Adding WiFi monitoring to US2000B and US2000C batteries.
  ☆146Updated 2 years ago
• mr-manuel / venus-os_dbus-mqtt-battery
  This Venus OS driver gets the data from MQTT and displays it as battery.
  ☆56Updated last month
• softwarecrash / Daly2MQTT
  ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems
  ☆167Updated 3 weeks ago
• syssi / esphome-soyosource-gtn-virtual-meter
  ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter
  ☆85Updated last week
• LHardwick-git / Victron-Service
  Temperature and Humidity d-bus services for Victron GX
  ☆19Updated 2 years ago
• txubelaxu / esphome-jk-bms
  ESPHome components to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE. Monitor multiple JK-PBx (hw v1…
  ☆51Updated 2 months ago
• Uksa007 / esphome-jk-bms-can
  ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon
  ☆187Updated 8 months ago
• ferelarg / Seplos3MQTT
  Python script to connect a battery pack using BMS Seplos v3.0 to MQTT
  ☆15Updated last year
• mr-manuel / venus-os_dbus-serialbattery
  Battery Monitor driver for serial battery in VenusOS GX systems
  ☆125Updated last week
• mr-manuel / venus-os_dbus-mqtt-solar-charger
  This Venus OS driver gets the data from MQTT and displays it as solar charger.
  ☆23Updated 3 months ago
• ArminJo / JK-BMSToPylontechCAN
  Converts the JK-BMS RS485 data to Pylontech CAN data
  ☆79Updated last month
• Ackmaniac / esphome-jk-bms-can
  ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon
  ☆16Updated last week
• NEEY-electronic / JK
  ☆64Updated 2 years ago
• syssi / esphome-jbd-bms
  ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE
  ☆153Updated this week
• byte4geek / SEPLOS_MQTT
  Read data From Seplos BMS and send them to the Home Assistant
  ☆44Updated last year
• jsphuebner / esp-egycounter
  ☆18Updated 2 months ago
• kwindrem / RpiDisplaySetup
  Raspberry Pi 7" touchscreen for Venus OS (also HDMI)
  ☆47Updated last month
• Sleeper85 / esphome-jk-bms-can
  ☆101Updated 6 months ago
• shining-man / bsc_fw
  Firmware battery safety controller (BSC)
  ☆124Updated this week
• vikt0rm / dbus-shelly-1pm-pvinverter
  Integrate Shelly 1PM into Victron Energies Venus OS as a pv inverter
  ☆55Updated 10 months ago
• victronenergy / dbus-mqtt
  Venus OS service mapping the D-Bus on Venus OS to MQTT
  ☆114Updated last year
• maxx-ukoo / jk-bms2pylontech
  JK BMS to PYLON CANBUS Protocol converter
  ☆34Updated 2 years ago
• ai-republic / bms-to-inverter
  Use, monitor and control any battery brand with any inverter! Application to read and monitor data from BMSes and write data to an invert…
  ☆161Updated 3 weeks ago