sarfata / kbox-hardwareLinks
Open-source electronics for your boat
☆18Updated 5 years ago
Alternatives and similar repositories for kbox-hardware
Users that are interested in kbox-hardware are comparing it to the libraries listed below
Sorting:
- Open-source electronics for your boat☆47Updated 5 years ago
- OpenTag Mainline Distribution☆97Updated 2 years ago
- Inherited object for use NMEA2000 library for Arduino Boards with MCP2515 CAN bus controller.☆20Updated 4 years ago
- To measure temperature and barometric pressure with a BMP280 sensor and send it to NMEA2000 network.☆15Updated 2 years ago
- This is the develoment space for a NMEA 2000 Voyage Data Recorder based on an ESP32 with CAN bus and SD card. The logger is using a SN65H…☆26Updated 4 years ago
- Reverse engineering of the masterbus protocol used by mastervolt products.☆17Updated 3 years ago
- ☆19Updated 7 years ago
- An NCurses-based TUI application for tracking activity over the CAN bus and decoding messages with provided EDS/OD files.☆28Updated last year
- Setup and install for ARMinARM board.☆29Updated 9 years ago
- TinyUSB-based logic analyzer code for Sigrok☆27Updated 4 years ago
- A LoRaWAN Device Library☆33Updated last year
- ☆19Updated 2 years ago
- This repository shows how to use the M5Stack as NMEA 2000 Display and WiFi Gateway.☆39Updated 3 years ago
- This is an FTDI board used to program ESP32 designs.☆16Updated 7 years ago
- USB stack for Atmel ATxmega32A4U and related parts☆38Updated 8 years ago
- A small Black Magic Probe based on the pinout of the STLink V2 support firmware☆34Updated 6 years ago
- Codebase for an STM32F746 discovery board used to upgrade an HP 141T Spectrum Analyzer display.☆19Updated last year
- ☆21Updated 8 years ago
- Open source mPCIe LoRa® concentrators from Nebra☆17Updated 2 years ago
- CAN driver project for the Espressif ESP32☆27Updated 4 years ago
- Symbols and Footprints for CadSoft Eagle☆29Updated 6 years ago
- Eagle libraries pretty footprints...☆39Updated 10 years ago
- Sailor Hat for ESP32 hardware☆46Updated 7 months ago
- Homebrew tap for KiCad, the electronic design automation suite.☆19Updated 3 years ago
- An ESP32 based gateway to send NMEA2000 PGNs to a SignalK server via WLAN or USB-Serial.☆21Updated 3 years ago
- An external Buzzer for NMEA2000 / SeaTalk-NG Alarms.☆14Updated 2 years ago
- Small breadboard friendly STM32 (eventually other mcu's too) eval boards with exposed JTAG and SWD for the use with Black Magic Probe and…☆68Updated 4 years ago
- STM32F030F4P6 breakout board pcb files and example code☆14Updated 9 years ago
- Embedded Software for UCCB STM32 microcontroller.☆25Updated 5 years ago
- Arduino library for interfacing with any GPS, GLONASS, Galileo or GNSS module and interpreting its NMEA messages.☆20Updated last year