ttlappalainen / NMEA2000_mcpLinks
Inherited object for use NMEA2000 library for Arduino Boards with MCP2515 CAN bus controller.
☆20Updated 4 years ago
Alternatives and similar repositories for NMEA2000_mcp
Users that are interested in NMEA2000_mcp are comparing it to the libraries listed below
Sorting:
- Inherited object for use NMEA2000 with ESP32 boards☆82Updated last year
- This is the develoment space for a NMEA 2000 Voyage Data Recorder based on an ESP32 with CAN bus and SD card. The logger is using a SN65H…☆26Updated 4 years ago
- Open-source electronics for your boat☆48Updated 5 years ago
- This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.☆80Updated 3 years ago
- Library for handling NMEA0183 messages☆86Updated 11 months ago
- To measure battery voltage, engine RPM, fuel level and exhaust teperature with an ESP32 and send it to a NMEA 2000 network.☆63Updated 3 years ago
- An ESP32 based gateway to read NMEA0183 AIS messages and transform them to NMEA2000 PGNs.☆36Updated 2 years ago
- Material für den NMEA2000-Workshop.☆42Updated last month
- An Actisense NGT-1 compatible NMEA 2000 USB gateway for the SH-ESP32☆32Updated last year
- This repository shows how to use the M5Stack as NMEA 2000 Display and WiFi Gateway.☆41Updated 3 years ago
- CAN Bus Shield - MCP2515&MCP2551☆14Updated 4 years ago
- Universal Signal K sensor framework for the ESP32 platform☆178Updated 4 months ago
- nmea2000 gateway with ESP32☆79Updated 3 months ago
- Sailor Hat for ESP32 hardware☆47Updated 9 months ago
- A small NMEA0183 parser☆18Updated 12 years ago
- Remote Control for an Evolution EV-1 Auto Pilot via NMEA2000/SeatalkNG.☆24Updated 3 years ago
- This repository shows how to build a Seatalk Autopilot Remote Control device based on an Arduino ProMicro and a simple 433 MHz KeyFob.☆67Updated last month
- ESP8266 based SignalK Wifi Sensors☆40Updated 4 years ago
- Arduino Library for CAN Bed☆27Updated 4 years ago
- A driver for the NMEA2000 library and standard linux socketCAN devices☆36Updated 5 years ago
- AIS Encoder Add-On for NMEA2000/NMEA0183 Library of Timo Lappalainen☆13Updated last year
- To measure temperature and barometric pressure with a BMP280 sensor and send it to NMEA2000 network.☆15Updated 2 years ago
- Object oriented canbus library for Atmel AVR CPUs used with the Arduino IDE.☆41Updated 3 years ago
- ☆12Updated last year
- Digital compass acting as B&G Precision 9 based on ESP32 and CMPS14☆18Updated 11 months ago
- CAN_Interface for ESP32 (Cannelloni Protocol)☆56Updated 4 years ago
- Arduino library for controlling the MCP2515 in order to receive/transmit CAN frames.☆96Updated 3 weeks ago
- Teensy 3.1/3.2/3.5/3.6/4.0/4.1 boards CAN driver library for the NMEA2000 library☆12Updated last year
- Common structures and functionality for CAN libraries☆135Updated last year
- Library to facilitate CAN functionality with the onboard MCP2515 CAN controller☆46Updated 7 years ago