thomasonw / NMEA2000_socketCANLinks
A driver for the NMEA2000 library and standard linux socketCAN devices
☆36Updated 5 years ago
Alternatives and similar repositories for NMEA2000_socketCAN
Users that are interested in NMEA2000_socketCAN are comparing it to the libraries listed below
Sorting:
- Library for handling NMEA0183 messages☆86Updated last year
- Inherited object for use NMEA2000 with ESP32 boards☆84Updated last year
- CAN Boat provides NMEA 2000 and NMEA 0183 utilities. It contains a NMEA 2000 PGN decoder and can read and write N2K messages. It is not m…☆596Updated 3 weeks ago
- This is the develoment space for a NMEA 2000 Voyage Data Recorder based on an ESP32 with CAN bus and SD card. The logger is using a SN65H…☆27Updated 4 years ago
- Inherited object for use NMEA2000 library for Arduino Boards with MCP2515 CAN bus controller.☆20Updated 4 years ago
- NMEA2000 library for Arduino☆619Updated 2 weeks ago
- NMEA Sentence Generator☆155Updated last year
- An ESP32 based gateway to read NMEA0183 AIS messages and transform them to NMEA2000 PGNs.☆38Updated 2 years ago
- This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.☆85Updated 3 years ago
- Material für den NMEA2000-Workshop.☆43Updated 2 months ago
- nmea2000 gateway with ESP32☆83Updated this week
- Open-source electronics for your boat☆49Updated 5 years ago
- An ESP32 based gateway to send NMEA2000 PGNs to a SignalK server via WLAN or USB-Serial.☆24Updated 3 years ago
- Remote Control for an Evolution EV-1 Auto Pilot via NMEA2000/SeatalkNG.☆25Updated 3 years ago
- CAN_Interface for ESP32 (Cannelloni Protocol)☆56Updated 4 years ago
- A TypeScript library for parsing, encoding, and interfacing with NMEA 2000 marine electronics networks☆109Updated 3 weeks ago
- A small NMEA0183 parser☆18Updated 12 years ago
- USB-CAN(SocketCAN) sketch for Arduino CAN-BUS shield☆138Updated 3 years ago
- Object oriented canbus library for Atmel AVR CPUs used with the Arduino IDE.☆41Updated 3 years ago
- Arduino Generic CAN Open Node☆25Updated 8 years ago
- Command-line tool to flashing devices by CAN-BUS☆86Updated 5 years ago
- NMEA 2000 to Signal K transformer☆30Updated last month
- NMEA0183 to Signal K parser☆34Updated 9 months ago
- To measure battery voltage, engine RPM, fuel level and exhaust teperature with an ESP32 and send it to a NMEA 2000 network.☆64Updated 3 years ago
- USB-CAN Analyzer Linux Support☆64Updated 9 months ago
- Library to facilitate CAN functionality with the onboard MCP2515 CAN controller☆46Updated 7 years ago
- This repository shows how to use the M5Stack as NMEA 2000 Display and WiFi Gateway.☆42Updated 3 years ago
- CAN Bus logger with SD card implemented using ChibiOS☆71Updated 6 years ago
- This repository shows how to build a Seatalk Autopilot Remote Control device based on an Arduino ProMicro and a simple 433 MHz KeyFob.☆67Updated 3 months ago
- Radar plugin for OpenCPN with support for Navico and some Garmin and Raymarine radars☆95Updated last month