nsayer / hydra
J1772 Hydra for Arduino
☆16Updated 5 years ago
Alternatives and similar repositories for hydra:
Users that are interested in hydra are comparing it to the libraries listed below
- An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.☆15Updated 2 years ago
- Retrieve battery diagnostic data from your smart electric drive EV.☆54Updated 2 years ago
- DehneEVSE - EV Type 2 Charging station☆15Updated 4 years ago
- Software for Damien Maguire's CHAdeMO controller☆21Updated 4 years ago
- ☆25Updated 9 years ago
- Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles☆13Updated last year
- diy BMS version 4 for Nissan Leaf cells☆20Updated 4 years ago
- Hacking and reverse engineering of the VW Onboard AC chargers☆15Updated last year
- An opensource solution for connecting OBD2 straight to the Nissan Leaf battery☆58Updated 7 months ago
- Opensource controller for the Lexus GS450H Hybrid inverter and gearbox☆20Updated 3 years ago
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆62Updated 4 years ago
- Arduino projects for the Boxster☆20Updated 4 years ago
- OpenEVSE Hardware☆181Updated last month
- SimpBMS Documentation☆87Updated 2 years ago
- Open Inverter - Alternative Web Interface☆31Updated 3 years ago
- Firmware for Open EVSE☆120Updated last year
- Collection of CAN logs from different electric vehicles☆31Updated 8 months ago
- Do it Yourself through hole boards☆12Updated 7 years ago
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆78Updated 4 months ago
- CAN Bus logger with SD card implemented using ChibiOS☆69Updated 6 years ago
- ESP8266 WiFi for OpenEVSE Version 2.x☆77Updated 3 months ago
- Development of a control unit to permit Chademo 50kw DC Fast Charging on converted electric vehicles☆43Updated 4 years ago
- SOC Meter for Nissan Leaf - AVR CAN Bus Interface☆43Updated 10 years ago
- ☆16Updated last month
- Arduino firmware for DehneEVSE charging station☆59Updated 2 years ago
- ESP32 talks via SPI with QCA7005 PLC modem☆20Updated last year
- This is an Arduino library providing an emulation of the CAN communication protocol of the BMS (battery management system) on a Renault T…☆84Updated last year
- WT32-ETH01 with tpLink HomePlug modem as CCS charge controller☆24Updated last year
- Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging☆46Updated last year
- ☆10Updated last year