htool / ESP32_Precision-9_compass_CMPS14
Digital compass acting as B&G Precision 9 based on ESP32 and CMPS14
☆18Updated 7 months ago
Alternatives and similar repositories for ESP32_Precision-9_compass_CMPS14:
Users that are interested in ESP32_Precision-9_compass_CMPS14 are comparing it to the libraries listed below
- This repository shows how to use the M5Stack as NMEA 2000 Display and WiFi Gateway.☆38Updated 3 years ago
- An Actisense NGT-1 compatible NMEA 2000 USB gateway for the SH-ESP32☆31Updated last year
- Sailor Hat for ESP32 hardware☆45Updated 4 months ago
- This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.☆76Updated 3 years ago
- Inherited object for use NMEA2000 with ESP32 boards☆75Updated 7 months ago
- This is the develoment space for a NMEA 2000 Voyage Data Recorder based on an ESP32 with CAN bus and SD card. The logger is using a SN65H…☆26Updated 3 years ago
- Remote Control for an Evolution EV-1 Auto Pilot via NMEA2000/SeatalkNG.☆21Updated 3 years ago
- nmea2000 gateway with ESP32☆74Updated 2 weeks ago
- Inherited object for use NMEA2000 library for Arduino Boards with MCP2515 CAN bus controller.☆20Updated 3 years ago
- To measure battery voltage, engine RPM, fuel level and exhaust teperature with an ESP32 and send it to a NMEA 2000 network.☆56Updated 3 years ago
- ☆11Updated 7 months ago
- Material für den NMEA2000-Workshop.☆38Updated last year
- To measure temperature and barometric pressure with a BMP280 sensor and send it to NMEA2000 network.☆14Updated 2 years ago
- Estimate ocean wave height (or vessel heave) and period from vertical acceleration using IMU on esp32☆27Updated last month
- DIY-Windsensor based on an ESP8266 with 3D printed enclosure☆12Updated 3 years ago
- AIS Encoder Add-On for NMEA2000/NMEA0183 Library of Timo Lappalainen☆11Updated 11 months ago
- This repository shows how to build a Seatalk Autopilot Remote Control device based on an Arduino ProMicro and a simple 433 MHz KeyFob.☆65Updated last year
- Universal Signal K sensor framework for the ESP32 platform☆166Updated last week
- ☆12Updated last month
- Sharing boat data across NMEA0183/NMEA2000/Bluetooth/IoT/MQTT with Android anchor watcher app and webpage.☆10Updated 10 months ago
- An ESP32 based gateway to send NMEA2000 PGNs to a SignalK server via WLAN or USB-Serial.☆21Updated 3 years ago
- An ESP32 based gateway to read NMEA0183 AIS messages and transform them to NMEA2000 PGNs.☆33Updated 2 years ago
- CAN Bus Shield - MCP2515&MCP2551☆14Updated 4 years ago
- Teensy 3.1/3.2/3.5/3.6/4.0/4.1 boards CAN driver library for the NMEA2000 library☆12Updated last year
- A display for the M5Stack connecting via JSON to the NMEA 2000 WiFi Gateway.☆16Updated 4 years ago
- Nexus FDX decoder for Garmin GND10☆15Updated 6 years ago
- An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V po…☆37Updated 5 years ago
- ☆16Updated last year
- SensESP32 Engine mointor code v2☆20Updated 4 months ago
- Open-source electronics for your boat☆47Updated 4 years ago