AK-Homberger / M5Stack-NMEA-2000-Display-CAN-BUS
This repository shows how to use the M5Stack as NMEA 2000 Display and WiFi Gateway.
☆35Updated 2 years ago
Related projects ⓘ
Alternatives and complementary repositories for M5Stack-NMEA-2000-Display-CAN-BUS
- Remote Control for an Evolution EV-1 Auto Pilot via NMEA2000/SeatalkNG.☆20Updated 2 years ago
- Inherited object for use NMEA2000 with ESP32 boards☆68Updated 3 months ago
- To measure temperature and barometric pressure with a BMP280 sensor and send it to NMEA2000 network.☆13Updated last year
- To measure battery voltage, engine RPM, fuel level and exhaust teperature with an ESP32 and send it to a NMEA 2000 network.☆54Updated 2 years ago
- Sailor Hat for ESP32 hardware☆45Updated 3 weeks ago
- An Actisense NGT-1 compatible NMEA 2000 USB gateway for the SH-ESP32☆31Updated last year
- A display for the M5Stack connecting via JSON to the NMEA 2000 WiFi Gateway.☆16Updated 4 years ago
- nmea2000 gateway with ESP32☆65Updated this week
- This is the develoment space for a NMEA 2000 Voyage Data Recorder based on an ESP32 with CAN bus and SD card. The logger is using a SN65H…☆26Updated 3 years ago
- Material für den NMEA2000-Workshop.☆34Updated last year
- Remote control for anchor chain that shows current chain lengtht via WLAN to phone/tablet.☆15Updated 4 years ago
- This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.☆75Updated 2 years ago
- Inherited object for use NMEA2000 library for Arduino Boards with MCP2515 CAN bus controller.☆19Updated 3 years ago
- Node red nodes for use with the signalk-node-red plugin☆12Updated 11 months ago
- An ESP32 based gateway to send NMEA2000 PGNs to a SignalK server via WLAN or USB-Serial.☆18Updated 2 years ago
- Digital compass acting as B&G Precision 9 based on ESP32 and CMPS14☆18Updated 3 months ago
- Reads NMEA0183 messages from two serial lines and forwards multiplexed messages to USB-Serial and WLAN as UDP broadcast.☆10Updated 2 years ago
- AIS Encoder Add-On for NMEA2000/NMEA0183 Library of Timo Lappalainen☆10Updated 7 months ago
- ☆27Updated 2 years ago
- ☆14Updated 8 months ago
- ☆19Updated 3 years ago
- CAN_Interface for ESP32 (Cannelloni Protocol)☆52Updated 3 years ago
- An ESP32 based gateway to read NMEA0183 AIS messages and transform them to NMEA2000 PGNs.☆30Updated last year
- This repository shows how to build a Seatalk Autopilot Remote Control device based on an Arduino ProMicro and a simple 433 MHz KeyFob.☆63Updated 8 months ago
- An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V po…☆36Updated 5 years ago
- Open-source electronics for your boat☆47Updated 4 years ago
- CAN Bus Shield - MCP2515&MCP2551☆14Updated 3 years ago
- ☆40Updated 4 years ago
- nmea2000 gateway with ESP32☆14Updated this week
- Estimate ocean wave height (or vessel heave) and period from vertical acceleration using IMU on esp32☆24Updated 2 weeks ago