Alternatives and similar repositories for bl602-re:

Users that are interested in bl602-re are comparing it to the libraries listed below

• pine64 / bl602-docs
  Documentation of the BL602 IC
  ☆65Updated 2 years ago
• spacemeowx2 / blflash
  bl602 serial flasher
  ☆56Updated 2 years ago
• pine64 / bl_iot_sdk
  BL602 SDK (Pine64 fork)
  ☆132Updated 2 years ago
• mkroman / awesome-bouffalo
  A curated list of tooling, documentation and other resources for Bouffalo Lab chips
  ☆58Updated 3 years ago
• sipeed / bl602-hal
  Hardware Abstract Layer for BL602 RISC-V WiFi + BLE SoC in embedded Rust
  ☆75Updated last year
• stschake / bl60x-flash
  Programming tool for Bouffalo Labs BL602/BL604 chips
  ☆24Updated 4 years ago
• nic3-14159 / CH347-Research
  Documenting the USB packet format of the WCH CH347
  ☆15Updated 2 years ago
• riscv-rust / gd32vf103-pac
  Peripheral access crate for GD32VF103
  ☆36Updated 2 months ago
• cyrozap / rv51
  A RISC-V emulator for the 8051 (MCS-51) microcontroller.
  ☆132Updated 4 months ago
• kprasadvnsi / riscv-openocd-wch
  OpenOCD source code for CH32V series MCUs released by Mounriver IDE
  ☆52Updated 2 years ago
• starfive-tech / JH7100_Docs
  ☆59Updated 3 years ago
• sipeed / bl602-pac
  Embedded Rust's Peripheral Access Crate for BL602 microcontrollers
  ☆19Updated 10 months ago
• fxsheep / openocd_wchlink-rv
  A modern port of OpenOCD to WCH-Link RISC-V (see project wiki)
  ☆19Updated 2 years ago
• bouffalolab / bl808_linux
  ☆128Updated last year
• smaeul / bouffalo-loader
  Run an executable from RAM on a Bouffalo MCU (BL602 or BL808)
  ☆22Updated 2 years ago
• openbouffalo / buildroot_bouffalo
  Linux Image for the BL808 CPU by Bouffalo Lab
  ☆130Updated last year
• bjoernQ / blash
  A tool to flash BL602 via JTAG + serial without pressing buttons / setting jumpers
  ☆11Updated 2 years ago
• maquefel / licheerv-boot-build
  Wrapper to Sipeed LicheeRV Nezha CM C906 boot0, opensbi, u-boot, kernel with tiny initramfs
  ☆29Updated 2 years ago
• raspberrypi / armulet
  ☆17Updated 5 months ago
• espressif / esp32c3-direct-boot-example
  Example of ESP32-C3 (rev. 3 and later) "direct boot" feature.
  ☆71Updated last year
• whitequark / libfx2
  Chip support package for Cypress EZ-USB FX2 series microcontrollers
  ☆74Updated 5 months ago
• c-sky / csky-doc
  ☆24Updated 3 years ago
• adamgreig / ecpdap
  ECPDAP allows you to program ECP5 FPGAs and attached SPI flash using CMSIS-DAP probes in JTAG mode.
  ☆59Updated last year
• bouffalolab / bl_docs
  Datasheets and Reference Manual for BL602/BL808
  ☆144Updated last year
• smaeul / linux
  Patches include sunxi platform support and various driver fixes
  ☆79Updated last year
• bouffalolab / blwnet_xram
  Linux virtual Ethernet driver and utility enabling BL808 Linux to use on-chip Wi-Fi
  ☆23Updated last year
• SmartArduino / Doiting_BL
  BL602 SDK
  ☆65Updated 4 years ago
• ch32-rs / qingke
  Low level and runtime support for WCH's 32bit QingKe RISC-V MCUs
  ☆12Updated last month
• openbouffalo / OBLFR
  OpenBouffalo Firmware Repository
  ☆34Updated last year
• ch32-rs / ch32v00x-hal
  HAL for the CH32V003 family of microcontrollers
  ☆31Updated 8 months ago