Alternatives and similar repositories for bl60x-flash:

Users that are interested in bl60x-flash are comparing it to the libraries listed below

• pine64 / bl602-docs
  Documentation of the BL602 IC
  ☆65Updated 2 years ago
• pine64 / bl602-re
  Reverse engineering of BL602 blobs
  ☆100Updated last year
• renzenicolai / bl602tool
  A tool for flashing BL602 boards, work in progress
  ☆14Updated 4 years ago
• spacemeowx2 / blflash
  bl602 serial flasher
  ☆56Updated 2 years ago
• mkroman / awesome-bouffalo
  A curated list of tooling, documentation and other resources for Bouffalo Lab chips
  ☆58Updated 3 years ago
• bouffalolab / BLOpenFlasher
  ☆17Updated 4 years ago
• SmartArduino / Doiting_BL
  BL602 SDK
  ☆65Updated 4 years ago
• openbouffalo / OBLFR
  OpenBouffalo Firmware Repository
  ☆36Updated last year
• bouffalolab / buildroot_bouffalo
  Linux Image for the BL808 CPU by Bouffalo Lab
  ☆19Updated 3 months ago
• kprasadvnsi / riscv-openocd-wch
  OpenOCD source code for CH32V series MCUs released by Mounriver IDE
  ☆54Updated 3 years ago
• newbrain / riscv-openocd-wch
  This is the OpenOCD source code modified to support WCHlink and CH32Vxxx MCUs, received from MounRiver after my GPL request, and publishe…
  ☆17Updated 2 years ago
• bouffalolab / blwnet_xram
  Linux virtual Ethernet driver and utility enabling BL808 Linux to use on-chip Wi-Fi
  ☆23Updated last year
• farpatch / farpatch
  Farpatch debugger software layer, backed by Black Magic
  ☆49Updated 3 weeks ago
• sipeed / Longduino
  Longduino is an Arduino port for gd32v mcu.
  ☆70Updated 3 years ago
• espressif / esp32c3-direct-boot-example
  Example of ESP32-C3 (rev. 3 and later) "direct boot" feature.
  ☆73Updated last year
• basilhussain / ch32v003-bootloader-docs
  A 'missing manual' for the WCH CH32V003 microcontroller factory bootloader
  ☆23Updated 4 months ago
• bjoernQ / blash
  A tool to flash BL602 via JTAG + serial without pressing buttons / setting jumpers
  ☆11Updated 2 years ago
• esmil / gd32vf103inator
  Program the GD32VF103 using C, your favourite editor and make
  ☆49Updated last year
• robots / wch-ch32v20x-flash
  ☆12Updated last year
• Disasm / f042-ftdi
  ☆18Updated 4 years ago
• smaeul / bouffalo-loader
  Run an executable from RAM on a Bouffalo MCU (BL602 or BL808)
  ☆22Updated 2 years ago
• openwch / ch569
  SDK sch&layout reference design and datasheet documention
  ☆60Updated last year
• pine64 / bl_iot_sdk
  BL602 SDK (Pine64 fork)
  ☆132Updated 2 years ago
• jeanthom / stlink-tool
  Firmware uploader for ST-Link
  ☆67Updated 11 months ago
• fxsheep / openocd_wchlink-rv
  A modern port of OpenOCD to WCH-Link RISC-V (see project wiki)
  ☆20Updated 3 years ago
• lupyuen / pi-swd-spi
  Implementation of SWD protocol with Raspberry Pi Bidirectional SPI
  ☆15Updated 5 years ago
• lundmar / riscv-gd32vf103-demo
  Simple demo firmware for the RISC-V GD32VF103
  ☆29Updated 4 years ago
• swetland / mdebug
  Debugger For Cortex-M MCUs (Linux & OSX)
  ☆26Updated 2 years ago
• probe-rs / flash-algorithm-template
  A template for writing CMSIS-Pack flash algorithms in Rust
  ☆13Updated 3 months ago
• openwch / ch34x
  CH340, CH343, CH342, CH344,CH348
  ☆34Updated 2 years ago