Alternatives and similar repositories for Doiting_BL:

Users that are interested in Doiting_BL are comparing it to the libraries listed below

• sipeed / M1s_BL808_SDK
  M1s(BL808)SDK
  ☆58Updated 2 years ago
• bouffalolab / bl_docs
  Datasheets and Reference Manual for BL602/BL808
  ☆148Updated last year
• sipeed / M1s_BL808_example
  M1s_BL808_example
  ☆70Updated 2 years ago
• diodep / ch55x_dualserial
  CH552 Dual USB to Serial Bridge.
  ☆77Updated 8 months ago
• mkroman / awesome-bouffalo
  A curated list of tooling, documentation and other resources for Bouffalo Lab chips
  ☆58Updated 3 years ago
• ElectronicCats / DAP-Cat-Programmer
  An Open-Source CMSIS-DAP Debug Probe based on DAPLink and USB bus convert and it can realize USB convert to serial interface based in CH5…
  ☆94Updated 8 months ago
• espressif / esp32c3-direct-boot-example
  Example of ESP32-C3 (rev. 3 and later) "direct boot" feature.
  ☆75Updated last year
• 44670 / FBrowser
  ☆33Updated 2 years ago
• hcly / f1c100s
  f1c100s source code
  ☆32Updated 5 months ago
• metro94 / FlappyBoard
  A minimum development board for CH32V203G6.
  ☆44Updated 2 years ago
• r4d10n / micropython-wch-ch32v307
  MicroPython for WCH CH32V307
  ☆35Updated 2 years ago
• CherryUSB / BL702-DAPLink
  ☆33Updated last year
• openwch / nfc
  The whole NFC solution (source code and schematic&layout) based on WCH chips
  ☆42Updated last year
• blueskull / CH552-JTAG
  USB-JTAG Adapter Using CH552
  ☆68Updated 3 years ago
• kaidegit / CMSIS-DAPbyWCH
  a cheap CMSIS-DAP debugger by an WCH chip named CH549F
  ☆45Updated 4 years ago
• wuxx / f1c100s-gpio-tools
  Command-line access to F1C100s GPIO
  ☆24Updated 5 years ago
• bouffalolab / bl808_linux
  ☆129Updated last year
• sipeed / Longan-DOC
  Longan RV32 Boards Document
  ☆47Updated 5 years ago
• pine64 / bl602-docs
  Documentation of the BL602 IC
  ☆65Updated 2 years ago
• Icenowy / sunxi-tools
  tools to help hacking Allwinner SoC devices
  ☆64Updated 2 years ago
• openwch / usb-jtag-spi
  Single-chip solution for Hi-speed USB2.0(480Mbps) JTAG/SPI Debugger based on RISC-V MCU CH32V30x/CH32V20x
  ☆110Updated last year
• Seeed-Studio / Seeed_Arduino_DAPLink
  An open-source DAPLink Arduino Library supports Keil MDK, IAR Embedded Workbench, OpenOCD, and other commonly used IDE.
  ☆35Updated 3 months ago
• milk-v / duo-manifest
  ☆64Updated last year
• SoCXin / RDA8810
  L4：Cortex A5 GSM SoC RDA8810
  ☆24Updated 5 years ago
• wuxx / nrf24-ble
  ☆20Updated 4 years ago
• w600 / sdk
  unofficial sdk of w600
  ☆102Updated 2 years ago
• Edragon / RDA-RDA5981
  ☆39Updated 5 years ago
• newbrain / riscv-openocd-wch
  This is the OpenOCD source code modified to support WCHlink and CH32Vxxx MCUs, received from MounRiver after my GPL request, and publishe…
  ☆18Updated 2 years ago
• stschake / bl60x-flash
  Programming tool for Bouffalo Labs BL602/BL604 chips
  ☆24Updated 4 years ago
• rgwan / open-ec
  Opensource embedded controller firmware for sipeed boards.
  ☆38Updated 6 years ago