nabilt / Bluetooth-ODB-2-AdapterLinks
Bluetooth ODB-2 Adapter based on the STN1110
☆43Updated 8 years ago
Alternatives and similar repositories for Bluetooth-ODB-2-Adapter
Users that are interested in Bluetooth-ODB-2-Adapter are comparing it to the libraries listed below
Sorting:
- Eagle CAD files for CANBus Triple Hardware☆57Updated 8 years ago
- CAN Bus logger with SD card implemented using ChibiOS☆72Updated 6 years ago
- Open Source CAN bus Analyser and Simulation Software☆67Updated 6 months ago
- ☆17Updated 10 years ago
- OBD2 reader with Arduino Uno supporting SAE J1850 VPW protocol☆13Updated 10 years ago
- This is a small example sketch that simulates a cars ecu☆81Updated 4 years ago
- Library to facilitate CAN functionality with the onboard MCP2515 CAN controller☆46Updated 7 years ago
- Generalized Vehicle Reverse Engineering Tool - firmware for Arduino Due based boards☆107Updated 7 years ago
- CAN_Interface for ESP32 (Cannelloni Protocol)☆59Updated 4 years ago
- Arduino Library for CAN Bed☆28Updated 4 years ago
- A board that provides a serial interface with a vehicle's OBD-II bus.☆88Updated 6 years ago
- Android CAN client☆64Updated 8 years ago
- Arduino based CAN bus reader and logger for vehicle information important to autocross racers☆14Updated 11 years ago
- CAN Bus Bridge / Smart Repeater☆36Updated 8 months ago
- Arduino Code (eventually library) for communicating with J1850 VPW OBD-II equipped cars.☆21Updated 10 years ago
- ☆51Updated 6 years ago
- ELM327-based OBD-II Bluetooth interface☆81Updated 5 years ago
- ESP32 slcan compatible device☆103Updated 4 years ago
- Embedded Software for UCCB STM32 microcontroller.☆25Updated 5 years ago
- Multiplatform Arduino library for supporting the native CAN controller on Due (SAM3X) and Teensy 3.1 (K2X) as well as MCP2515 through SPI☆96Updated 7 years ago
- ESP8266 based CAN-Bus Diagnostic Tool☆43Updated 4 years ago
- An Arduino based LINBUS stack and signal interceptor/injector.☆197Updated 6 years ago
- CAN driver project for the Espressif ESP32☆27Updated 4 years ago
- Arduino script to log CAN bus information to SD card. Mainly focused on J1939.☆25Updated 5 years ago
- USB-CAN(SocketCAN) sketch for Arduino CAN-BUS shield☆138Updated 4 years ago
- Generalized Electric Vehicle Control Unit☆117Updated 3 years ago
- A reverse engineering tool for systems based on CAN bus communications☆85Updated 4 years ago
- Firmware for the CANalyze hardware.☆71Updated 2 years ago
- Provides a bridge between any OBD2 compliant vehicle and the CAN bus interface.☆46Updated 5 years ago
- ☆84Updated last year