Alternatives and similar repositories for pyUSBtin

Users that are interested in pyUSBtin are comparing it to the libraries listed below

• akpc806a / CAN_Logger
  CAN Bus logger with SD card implemented using ChibiOS
  ☆72Updated 6 years ago
• PhilippFux / ESP32_CAN_Interface
  CAN_Interface for ESP32 (Cannelloni Protocol)
  ☆59Updated 4 years ago
• krumboeck / usb2can_firmware
  ☆17Updated 10 years ago
• roboterclubaachen / usb2can
  ☆51Updated 6 years ago
• LibreSolar / rpi-can
  CAN bus interface for Raspberry Pi (Zero W)
  ☆25Updated 7 years ago
• vladisenko / USB-CAN
  Yet another USB-CAN adapter.
  ☆14Updated 3 years ago
• nexulm / candleLight_fw
  gs_usb compatible firmware for candleLight, cantact and canable
  ☆24Updated 6 years ago
• sebi2k1 / openCanSuite
  ☆31Updated 8 years ago
• EmbedME / USBtinViewer
  Simple GUI for USBtin (USB to CAN interface)
  ☆42Updated 5 years ago
• normaldotcom / CANard
  A fork of CANard with various tweaks and improvements implemented
  ☆50Updated 6 years ago
• GBert / misc
  miscellaneous stuff / unsorted
  ☆99Updated 11 months ago
• nabilt / Bluetooth-ODB-2-Adapter
  Bluetooth ODB-2 Adapter based on the STN1110
  ☆43Updated 8 years ago
• carloop / hardware
  OBD-II CAN adapter for Particle Electron, Photon, and RedBear Duo
  ☆109Updated 6 years ago
• openxc / reference-vi
  Open Source Hardware Schematics for OpenXC Vehicle Interface
  ☆39Updated 5 years ago
• MHS-Elektronik / CANcool
  Open Source CAN bus Analyser and Simulation Software
  ☆67Updated 7 months ago
• majbthrd / SAMC21demoCAN
  CAN and CAN-FD demonstration code for SAMC21-XPRO
  ☆14Updated 8 years ago
• CANBus-Triple / CANBus-Triple-Hardware
  Eagle CAD files for CANBus Triple Hardware
  ☆57Updated 8 years ago
• cvra / CAN-USB-dongle-fw
  slcan firmware for the CVRA CAN to USB dongle
  ☆37Updated 4 years ago
• vsergeev / arm-bmw-sw
  ARM Bare Metal Widget (arm-bmw) software
  ☆19Updated 8 years ago
• rkollataj / mcba_firmware
  Michrochip CAN BUS Analyzer firmware
  ☆22Updated 9 years ago
• electronut / ElectronutLabs-Bumpy
  An inexpensive Open Source blackmagic probe compatible SWD debugger designed to be used with ARM GDB.
  ☆34Updated 6 years ago
• ARMinARM / arminarm
  Setup and install for ARMinARM board.
  ☆29Updated 9 years ago
• akpc806a / CAN_Bridge
  CAN Bus Bridge / Smart Repeater
  ☆36Updated 8 months ago
• collin80 / due_canopen
  CANOpen library for due_can
  ☆11Updated 10 years ago
• IntergatedCircuits / CanDybugFW
  CAN bus gateway over USB
  ☆21Updated 4 years ago
• marcinbor85 / can-prog
  Command-line tool to flashing devices by CAN-BUS
  ☆89Updated 6 years ago
• CascoLogix / KiCAD_Libraries
  ☆26Updated last month
• saleae / python-saleae-cli
  basic command line utility to automate the Saleae Logic software using the ppannuto python-saleae library
  ☆41Updated 3 years ago
• McNeight / arducross
  Arduino based CAN bus reader and logger for vehicle information important to autocross racers
  ☆14Updated 11 years ago
• cvra / CAN-USB-dongle
  CAN bus to USB adapter dongle
  ☆12Updated 2 years ago