Alternatives and similar repositories for parallella-uboot:

Users that are interested in parallella-uboot are comparing it to the libraries listed below

• parallella / parallella-utils
  Library of various community contributed Parallella board admin scripts and programs
  ☆38Updated 8 years ago
• parallella / parallella-linux
  Linux Kernel forked from ADI (with latest ADI HDMI drivers)
  ☆68Updated 5 years ago
• adapteva / epiphany-examples
  Simple examples showing how to program the Epiphany
  ☆84Updated 5 years ago
• parallella / parallella-fpga
  FPGA Development for the parallella
  ☆19Updated 7 years ago
• parallella / axi-csi-rx
  AXI MIPI CSI2 RX FPGA core and kernel driver
  ☆9Updated 9 years ago
• parallella / parabuntu
  Official Ubuntu distro for Parallella
  ☆123Updated 4 years ago
• Lichtso / UnikernelExperiments
  TCP/IPv6-enabled Pine64+ bootloader
  ☆13Updated 7 years ago
• adapteva / epiphany-gcc
  GCC for Epiphany
  ☆16Updated 5 years ago
• myriadrf / Novena-RF
  A 300 MHz to 3800 MHz RF module for the Novena Open Hardware Computing Platform
  ☆50Updated 8 years ago
• FPGAwars / toolchain-icestorm
  Icestorm, Arachne-pnr and Yosys pre-built binaries: GNU/Linux(+ARM), Windows and Mac OS
  ☆38Updated 2 years ago
• lowRISC / lowrisc-fpga
  Untethered (stand-alone) FPGA implementation of the lowRISC SoC
  ☆54Updated 5 years ago
• devbisme / CAT-Board
  The CAT Board is a Raspberry Pi HAT with a Lattice iCE40HX FPGA.
  ☆61Updated 11 months ago
• adapteva / epiphany-sdk
  Epiphany SDK build scripts (start here!)
  ☆124Updated 5 years ago
• cliffordwolf / icotools
  Tools and Examples for IcoBoard
  ☆79Updated 3 years ago
• myriadrf / Parallella-RF
  300 MHz to 3800 MHz TCVR daughter card for the Parallella board
  ☆18Updated 10 years ago
• stacksmith / fpgasm
  FPGA assembler! Create bare-metal FPGA designs without Verilog or VHDL (Not to self: use Lisp next time)
  ☆53Updated 3 years ago
• cseed / cynth
  a simple C-to-Verilog compiler
  ☆48Updated 7 years ago
• embmicro / mojo-arduino
  This is the base code using by the Mojo V3 to load the FPGA and act as a USB to serial port/ADC for the FPGA. This code is intended to be…
  ☆35Updated 5 years ago
• Fabien-Chouteau / Ada-PicoRV32-example
  Example of Ada code running on the PicoRV32 RISC-V CPU for FPGA
  ☆15Updated 6 years ago
• xesscorp / XuLA2
  Everything to do with the XuLA2 FPGA board: schematics, layout, firmware, example FPGA designs, documentation, etc.
  ☆52Updated 9 years ago
• atgreen / moxie-cores
  Moxie-compatible core repository
  ☆45Updated last year
• CarlosGS / iceDAQ
  Real time data acquisition based on the Lattice ICEstick hardware
  ☆14Updated 7 years ago
• jacgoudsmit / P1V
  Propeller 1 design and example files to be run on FPGA boards.
  ☆21Updated 5 years ago
• Hoernchen / Epiphany
  the actual epiphany backend
  ☆20Updated 11 years ago
• FreeSRP / gr-osmosdr
  A fork of gr-osmosdr supporting the FreeSRP
  ☆21Updated 7 years ago
• alvieboy / ZPUino-HDL
  ZPUino HDL implementation
  ☆89Updated 6 years ago
• intel / edison-u-boot
  DISCONTINUATION OF PROJECT. This project will no longer be maintained by Intel. Intel will not provide or guarantee development of or s…
  ☆34Updated 2 years ago
• drom / quark
  Stack CPU Work In Progress
  ☆30Updated last year
• xesscorp / StickIt
  StickIt! board and modules that support the XuLA FPGA board.
  ☆20Updated 9 years ago
• chipforge / PearlRiver
  1st Testwafer for LibreSilicon
  ☆15Updated 5 years ago