Alternatives and similar repositories for eagle-circuit-designs:

Users that are interested in eagle-circuit-designs are comparing it to the libraries listed below

• anszom / stm8flash
  stm8flash with support for the SPI-to-SWIM hack
  ☆16Updated 6 years ago
• Miceuz / triac-bloc
  An universal power block based on triac. In essence this is a solid state relay with some bells and whistles
  ☆50Updated 5 years ago
• slightlynybbled / curve_tracer_hardware
  Curve tracer - hardware source files
  ☆23Updated 7 years ago
• mike-rankin / SAMD21G18A_Sensor_Board
  SAMD21G18A Sensor Board
  ☆15Updated 8 years ago
• uChip / VoltageReferenceProgrammable
  Programmable Voltage Reference
  ☆17Updated 10 years ago
• bdring / PSoC_Grbl
  PSoc5 Port of Grbl CNC Controller
  ☆36Updated 8 years ago
• tedyapo / led-matrix-generator
  Eagle scripts for LED matrix display generation
  ☆14Updated 2 years ago
• sgreg / 4chord-midi
  The 4chord USB MIDI Keyboard
  ☆36Updated 3 months ago
• lhartmann / esp8266_reprap
  ESP8266-based I2S-output WS2812(B) Driver
  ☆51Updated 9 years ago
• RaD / SolderPaste14M2
  Solder Paste Dispenser
  ☆18Updated 10 years ago
• technoblogy / continuity-tester
  A simple continuity tester, based on an ATtiny85 and a piezo buzzer.
  ☆18Updated 7 years ago
• Fattoresaimon / i2cencoder
  Documentation, source code and examples about the I2C Encoder project
  ☆42Updated 5 years ago
• ottoragam / Magnetic-Incremental-Rotary-Encoder
  This project aims to provide a compact, easy to use, relatively high resolution and arguably cheap encoder. It uses the AS5040 magnetic r…
  ☆12Updated 9 years ago
• andysworkshop / awreflow
  Andy's Workshop Reflow Oven Controller
  ☆33Updated 7 years ago
• cpldcpu / Nanite
  Nano-Sized ATtiny85 devboard with USB Bootloader
  ☆90Updated 8 years ago
• kurt-schaefer / PantoProbe
  ☆24Updated 7 years ago
• lhartmann / esp_rtos_reprap
  Stepper motor controller based on FreeRTOS for the ESP8266.
  ☆63Updated 8 years ago
• IRNAS / ToslinkCNC
  CNC machine control modules with Toslink optical cables
  ☆27Updated 8 years ago
• bertrik / ElectronicLoad
  Arduino software for an electronically controlled load, based on a STM32 microcontroller
  ☆21Updated 4 years ago
• watterott / RPi-DPI-HAT
  Display Parallel Interface HAT (Hardware Attached on Top) for Raspberry Pi
  ☆18Updated 4 years ago
• cpldcpu / TinyTouchButton
  A touch controlled light with 4xWS2812 RGB LEDs and ATtiny 10
  ☆34Updated 6 years ago
• ohararp / ReflowOven
  Repository for OSHW Reflow Oven Control
  ☆26Updated 11 years ago
• cinderblock / 3-Phase-Controller
  Firmware for 3 Phase BLDC controller
  ☆41Updated 4 years ago
• OpenPanzerProject / Scout-ESC
  Dual motor serial controller - ATmega 328 MCU with VNH5019 motor drivers
  ☆16Updated 5 months ago
• alvarop / usb_c_power
  ☆13Updated 4 years ago
• smdprutser / GD32Challenge
  ☆19Updated 6 years ago
• kodera2t / Magical_tweezersIV
  ☆24Updated 8 years ago
• techie66 / CANSerial
  Serial port emulation over CAN bus
  ☆28Updated 2 years ago
• DPHAD / COGS-for-Makers
  A simple Cost-of-Goods Calculator for Makers to help identify what time and costs make up a product.
  ☆18Updated 6 years ago
• alunmorris / Multi-channel-wireless-voltmeter
  ☆14Updated 4 years ago