jangleboom / RTKRover
Real time kinematics rover (ESP32 + ZED-F9P) with BNO080 IMU, sends location and orientation to an iOS app.
☆13Updated 2 years ago
Alternatives and similar repositories for RTKRover:
Users that are interested in RTKRover are comparing it to the libraries listed below
- ☆35Updated last year
- Real time kinematics base station (ESP32 + ZED-F9P)☆32Updated 2 years ago
- AG Rooftop controller with NTRIP client and IMU (ESP32 Controller)☆38Updated 6 years ago
- fork for RTKbase https://github.com/Stefal/rtkbase. Tool used to create the raspberrypi.org Raspbian images☆20Updated 5 months ago
- Esp32 RTK BaseStation - sends u-Blox ZED-F9P RTCM correction data to rtk2go.com NTRIP caster☆30Updated 2 years ago
- Some sketches for the VL53L5CX ranging camera for use with the Arduino IDE☆21Updated 3 years ago
- Dual brushed motor ESC firmware compatible with brushless motor ESCs☆27Updated 9 months ago
- Code for an ESP32 based multirotor flight controller☆22Updated 4 years ago
- I came up with a design for a 3D printed Dynamic Spin Balancer using an ESP32, an MPU6050 and a hall sensor to help balance out my wheels…☆11Updated 3 years ago
- OpenIMU - Open Hardware Mini Logger based on ESP32☆42Updated 2 years ago
- ☆41Updated 4 years ago
- Low cost lidar with black PCB☆9Updated 3 years ago
- An Arduino Library for the BNO08x IMU combination triple axis accelerometer/gyro/magnetometer packaged with an ARM Cortex M0+ running pow…☆20Updated 7 months ago
- C Firmware for QingStation☆14Updated 2 years ago
- Transmit and receive programs for Arduino Feather M0 LoRa module to transmit one way data over LoRa☆11Updated last year
- ESP32 XBee UART Interface☆96Updated 2 years ago
- The hardware and enclosure for the popular centimeter level RTK Facet GNSS receiver with built in display.☆20Updated 5 months ago
- PID for Hoverboard motor with ZS-X11H controller☆20Updated last year
- Testbed code for the Swarm Drive (ESP32 based BLDC motor driver board)☆31Updated 4 years ago
- A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …☆33Updated 5 years ago
- ☆12Updated 5 months ago
- ☆24Updated 4 years ago
- An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V po…☆37Updated 5 years ago
- ☆32Updated last year
- ☆11Updated 2 years ago
- ☆22Updated 8 years ago
- Mahowii is pretty stable, improved and extended version of Multiwii.☆28Updated 8 months ago
- ESP32 NTRIP Interface☆46Updated last month
- With SINUSOIDAL BLDC control. Offers much quieter and smoother motor operation.☆43Updated 2 years ago
- Arduino library to control brushed DC motors by PWM. Uses optional attached encoders to drive fixed distances.☆45Updated 2 months ago