Alternatives and similar repositories for PAM-ESP32-Multi-MiFlora

Users that are interested in PAM-ESP32-Multi-MiFlora are comparing it to the libraries listed below

• stefanbode / Sonoff-Tasmota
  Provide ESP8266 based itead Sonoff with Web, MQTT and OTA firmware using Arduino IDE, enhanced with I2C options
  ☆126Updated 7 months ago
• marvinroger / arduino-shutters
  Arduino library to control non-smart roller shutters using time
  ☆61Updated 5 years ago
• emontnemery / domoticz_mqtt_discovery
  MQTT discovery plugin for Domoticz
  ☆40Updated 2 years ago
• brandond / esphome-tuya_pir
  ESPHome support for cheap WiFi PIR sensors
  ☆67Updated 3 years ago
• ben423423n32j14e / zigbee2mqttadminpanel
  Node-Red-Dashboard web interface for controlling Zigbee2MQTT
  ☆113Updated 5 years ago
• Stef-aap / RFLink-ESP
  Home Assistant / Domoticz tested with a RFLink, modified for ESP8266 and ESP32
  ☆109Updated 3 years ago
• RiRomain / Happy_Bubble_ESP32_Node
  An ESP_32 based node for an Happy Bubbles presence server.
  ☆27Updated 7 years ago
• xoseperez / sonoffsc
  Itead Studio SonoffSC custom firmware with MQTT and Domoticz support
  ☆104Updated 6 years ago
• koffienl / ESPimatic
  read/control DS18B20/DHT/IR/Relay from and to Pimatic on ESP8266
  ☆35Updated 7 years ago
• kloggy / Home-Assistant
  ☆45Updated 5 years ago
• jptrsn / ESP32-mqtt-room
  An ESP32 based presence detection node for use with the Home Assistant mqtt_room component for localized device presence detection.
  ☆254Updated 3 years ago
• alcar21 / WemosEM
  Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)
  ☆120Updated 4 years ago
• eschava / broadlink-mqtt
  MQTT client to control BroadLink devices
  ☆234Updated last year
• gijsje / nextion-esphome
  Nextion Display with ESPhome
  ☆28Updated 5 years ago
• fbacker / broadlink-mqtt-bridge
  Bridge Broadlink RM Devices with MQTT and API for e.g. OpenHAB
  ☆43Updated 2 years ago
• seb821 / espRFLinkMQTT
  ESP8266 gateway between RFLink and MQTT server
  ☆99Updated 3 years ago
• brianhanifin / esphome-config
  My ESPHome configuration files for my ESP8266 / ESP32 plugs and boards for use with Home Assistant.
  ☆115Updated last year
• Phileep / rflink-to-mqtt
  Bridge from RFLink to an mqtt broker using ESP8266 programmed with arduino IDE
  ☆38Updated 7 years ago
• sidddy / flora
  ESP32 BLE client for Xiaomi Mi Plant sensors
  ☆189Updated 4 years ago
• bruxy70 / Irrigation-with-display
  Garden irrigation based on Sonoff 4ch, with built-in Nextion display
  ☆153Updated 2 years ago
• EdddieN / machinon-domoticz_theme
  ☆46Updated 5 years ago
• piotrC4 / mqtt-ir-transceiver
  ESP8266 based bidirectional bridge between MQTT and IR (change MQTT message to IR signal and change received IR signal to MQTT message)
  ☆145Updated 4 years ago
• Snipercaine / Holiday-LED-files
  Home Assistant config.yaml and Arduino sketch for Addressable LEDs
  ☆75Updated 6 years ago
• glmnet / esphome_devices
  ☆55Updated 7 months ago
• Snipercaine / WLED-HomeAssistant
  Some flows to use nodeRed to control WLED
  ☆114Updated 5 years ago
• SamZorSec / Arilux_AL-LC0X
  Alternative firmware for Arilux AL-LC0X LED controllers, based on the MQTT protocol and a TLS connection
  ☆190Updated 5 years ago
• flatsiedatsie / domoticz-aurora-theme
  A modern theme for Domoticz, the open source home automation platform.
  ☆34Updated 2 years ago
• nldroid / CustomP1UartComponent
  Custom EspHome sensor for reading P1 port on dutch smart meters with ESP module for Home Assistant
  ☆63Updated 2 years ago
• schmurtzm / RFLink-ESP
  RFLink modified for ESP8266 and ESP32 ---> RF 433mhz to MQTT gateway
  ☆26Updated 4 years ago
• lspaula / Nextion-background-for-HASwitchPlate
  This is a Nextion display background for the HASwitchPlate
  ☆13Updated 4 years ago