ronzeiller / NMEA0183-AIS
AIS Encoder Add-On for NMEA2000/NMEA0183 Library of Timo Lappalainen
☆10Updated 9 months ago
Alternatives and similar repositories for NMEA0183-AIS:
Users that are interested in NMEA0183-AIS are comparing it to the libraries listed below
- This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.☆76Updated 2 years ago
- Remote Control for an Evolution EV-1 Auto Pilot via NMEA2000/SeatalkNG.☆21Updated 2 years ago
- Inherited object for use NMEA2000 with ESP32 boards☆71Updated 5 months ago
- An Actisense NGT-1 compatible NMEA 2000 USB gateway for the SH-ESP32☆31Updated last year
- ☆11Updated 5 months ago
- To measure battery voltage, engine RPM, fuel level and exhaust teperature with an ESP32 and send it to a NMEA 2000 network.☆55Updated 2 years ago
- An ESP32 based gateway to read NMEA0183 AIS messages and transform them to NMEA2000 PGNs.☆32Updated last year
- Library for handling NMEA0183 messages☆77Updated 4 months ago
- Remote control for anchor chain that shows current chain lengtht via WLAN to phone/tablet.☆15Updated 4 years ago
- nmea2000 gateway with ESP32☆70Updated last month
- Digital compass acting as B&G Precision 9 based on ESP32 and CMPS14☆18Updated 4 months ago
- To measure temperature and barometric pressure with a BMP280 sensor and send it to NMEA2000 network.☆13Updated last year
- Material für den NMEA2000-Workshop.☆36Updated last year
- nmea2000 gateway with ESP32☆15Updated this week
- This is the develoment space for a NMEA 2000 Voyage Data Recorder based on an ESP32 with CAN bus and SD card. The logger is using a SN65H…☆26Updated 3 years ago
- This repository shows how to use the M5Stack as NMEA 2000 Display and WiFi Gateway.☆36Updated 2 years ago
- Reads NMEA0183 messages from two serial lines and forwards multiplexed messages to USB-Serial and WLAN as UDP broadcast.☆10Updated 2 years ago
- SignalK Node Server Anchor Alarm Plugin☆13Updated 4 months ago
- This repository shows how to build a Seatalk Autopilot Remote Control device based on an Arduino ProMicro and a simple 433 MHz KeyFob.☆64Updated 10 months ago
- Inherited object for use NMEA2000 library for Arduino Boards with MCP2515 CAN bus controller.☆20Updated 3 years ago
- ESP8266 based SignalK Wifi Sensors☆38Updated 3 years ago
- Universal Signal K sensor framework for the ESP32 platform☆163Updated 3 weeks ago
- A display for the M5Stack connecting via JSON to the NMEA 2000 WiFi Gateway.☆16Updated 4 years ago
- Estimate ocean wave height (or vessel heave) and period from vertical acceleration using IMU on esp32☆25Updated last month
- Sailor Hat for ESP32 hardware☆45Updated 2 months ago
- The open source hardware gateway for OpenPlotter☆27Updated 7 months ago
- ☆20Updated 3 years ago
- CAN Bus Shield - MCP2515&MCP2551☆14Updated 4 years ago
- An Arduino library able to decode AIS messages☆30Updated last year
- An ESP32 based gateway to send NMEA2000 PGNs to a SignalK server via WLAN or USB-Serial.☆19Updated 2 years ago