aldas / go-nmea-clientLinks
Go client to read NMEA 2000 messages from canbus interfaces or usb devices
☆15Updated last year
Alternatives and similar repositories for go-nmea-client
Users that are interested in go-nmea-client are comparing it to the libraries listed below
Sorting:
- Teensy 3.1/3.2/3.5/3.6/4.0/4.1 boards CAN driver library for the NMEA2000 library☆12Updated last year
- To measure battery voltage, engine RPM, fuel level and exhaust teperature with an ESP32 and send it to a NMEA 2000 network.☆60Updated 3 years ago
- Material für den NMEA2000-Workshop.☆41Updated last year
- An Actisense NGT-1 compatible NMEA 2000 USB gateway for the SH-ESP32☆32Updated last year
- CAN Bus Shield - MCP2515&MCP2551☆14Updated 4 years ago
- Inherited object for use NMEA2000 library for Arduino Boards with MCP2515 CAN bus controller.☆20Updated 4 years ago
- Inherited object for use NMEA2000 with ESP32 boards☆80Updated 10 months ago
- Plugin to convert Signal K to NMEA2000☆23Updated last month
- This repository shows how to use the M5Stack as NMEA 2000 Display and WiFi Gateway.☆40Updated 3 years ago
- Estimate ocean wave height (or vessel heave), waves direction, and period from accelerations using IMU on esp32 using advanced Kalman fil…☆40Updated this week
- Open-source electronics for your boat☆47Updated 5 years ago
- nmea2000 gateway with ESP32☆76Updated last month
- NMEA 2000 to Signal K transformer☆28Updated 3 weeks ago
- This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.☆80Updated 3 years ago
- This is the develoment space for a NMEA 2000 Voyage Data Recorder based on an ESP32 with CAN bus and SD card. The logger is using a SN65H…☆26Updated 4 years ago
- NMEA2000 CLI parser for Actisense-Serial NGT-1 Gateway and saving data to InfluxDB via UDP and publishing it with MQTT☆10Updated 5 years ago
- An ESP32 based gateway to send NMEA2000 PGNs to a SignalK server via WLAN or USB-Serial.☆21Updated 3 years ago
- The open source hardware gateway for OpenPlotter☆29Updated last year
- iKonvert NMEA2000 Gateway SDK☆13Updated last year
- Digital compass acting as B&G Precision 9 based on ESP32 and CMPS14☆18Updated 10 months ago
- An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V po…☆38Updated 5 years ago
- Arduino Library for CAN Bed☆26Updated 4 years ago
- An ESP32 based gateway to read NMEA0183 AIS messages and transform them to NMEA2000 PGNs.☆35Updated 2 years ago
- ☆11Updated 10 months ago
- SensESP Project Template☆15Updated 2 months ago
- Sailor Hat for ESP32 hardware☆46Updated 7 months ago
- SignalK Node Server Anchor Alarm Plugin☆12Updated 4 months ago
- Signal K JavaScript client library☆23Updated 2 years ago
- support for the VE.Direct serial protocol supported by many Victron Energy products☆22Updated 8 months ago
- Remote Control for an Evolution EV-1 Auto Pilot via NMEA2000/SeatalkNG.☆23Updated 3 years ago