hirschmann / pid-autotune

Related projects ⓘ

Alternatives and complementary repositories for pid-autotune

• jackw01 / arduino-pid-autotuner
  Automated PID tuning using Ziegler-Nichols/relay method
  ☆177Updated 2 years ago
• CONTROLLINO-PLC / CONTROLLINO_Library
  ☆153Updated 2 weeks ago
• APMonitor / arduino
  Process Control Temperature Lab
  ☆97Updated 3 years ago
• br3ttb / Arduino-PID-AutoTune-Library
  ☆424Updated 4 years ago
• lipoyang / SOEM4Arduino
  Simple Open EtherCAT Master Library for Arduino
  ☆64Updated 3 years ago
• mike-matera / FastPID
  A fast, integer based PID controller suitable for Arduino.
  ☆140Updated last year
• koppi / mk
  LinuxCNC / Machinekit and EtherCAT notes.
  ☆59Updated last year
• Dlloydev / sTune
  Open loop PID autotuner using a novel s-curve inflection point test method. Tuning parameters are determined in about ½Tau on a first-ord…
  ☆98Updated 10 months ago
• sittner / linuxcnc-ethercat
  LinuxCNC EtherCAT HAL driver
  ☆208Updated 4 months ago
• ussserrr / pid-controller-gui
  PyQt-based application to control abstract remote PID regulator using customizable network interface
  ☆40Updated 5 years ago
• uStepper / uStepper
  Repository for uStepper
  ☆98Updated 4 years ago
• Stan-Reifel / SpeedyStepper
  Stepper motor control library for Arduino
  ☆91Updated 7 months ago
• Dlloydev / QuickPID
  A fast PID controller with multiple options. Various Integral anti-windup, Proportional, Derivative and timer control modes.
  ☆202Updated last year
• PowerBroker2 / ArduPID
  PID library for Arduinos with greater accuracy than the legacy Arduino PID library
  ☆89Updated 3 months ago
• arduino-libraries / ArduinoModbus
  ☆257Updated 2 weeks ago
• yaacov / ArduinoModbusSlave
  Modbus slave library for Arduino
  ☆204Updated 3 weeks ago
• ahsayde / Serial-Lab
  Serial Lab is a Windows application (Written in C#) that reads, writes and plots data from/to serial port
  ☆167Updated 5 years ago
• andreili / STM32-PLC
  The project is open source and open hardware, the purpose of which is to create a PLC based on STM32 MCU's.
  ☆54Updated 6 years ago
• bggardner / canopen-rpi
  CANopen nodes and services implemented in Python 3 for a Rasbperry Pi
  ☆41Updated 2 weeks ago
• r-downing / AutoPID
  Arduino AutoPID library
  ☆109Updated last year
• waspinator / AccelStepper
  Fork of AccelStepper
  ☆152Updated 4 months ago
• byDagor / Janus-Controller
  The Janus Controller is a Brushless motor driver with an on-board magnetic encoder, a three-phase MOSFET driver, three MOSFET half-bridge…
  ☆117Updated 3 years ago
• Pro / open62541-arduino
  open62541 OPC UA example for Arduino
  ☆35Updated 5 years ago
• NativeDesign / python-tmcl
  TMCL Serial interface to Trinamic Stepper Motors
  ☆19Updated 6 years ago
• 4-20ma / ModbusMaster
  Enlighten your Arduino to be a Modbus master
  ☆607Updated 3 months ago
• geekfactory / PID
  PID Control Library written in C language
  ☆124Updated 7 years ago
• araffin / arduino-robust-serial
  A simple and robust serial communication protocol. It was designed for Arduino but can be used for other purposes (e.g. bluetooth, socke…
  ☆135Updated last year
• pedromneto97 / AccelStepper-MicroPython
  AccelStepper Library for Micropyton - ESP32
  ☆37Updated 5 years ago
• imax9000 / Arduino-PID-Library
  ☆36Updated 6 months ago
• dsuarezv / GearSolver
  A cycloid gear graphical calculator to design cycloidal drives.
  ☆105Updated 2 years ago