Alternatives and similar repositories for CANFestivino

Users that are interested in CANFestivino are comparing it to the libraries listed below

• jgeisler0303 / AGCON
  Arduino Generic CAN Open Node
  ☆25Updated 8 years ago
• DanielMartensson / Easy-CANopen
  A CANopen protocol for all systems such as embedded, PC, etc.
  ☆118Updated 2 years ago
• CANopenNode / CANopenPIC
  CANopenNode on PIC microcontrollers.
  ☆65Updated 10 months ago
• roboterclubaachen / usb2can
  ☆51Updated 6 years ago
• mpcrowe / canopen-raspberrypi
  a CanOpen Raspberry Pi Project that integrates several other projects
  ☆32Updated 6 years ago
• marcinbor85 / can-prog
  Command-line tool to flashing devices by CAN-BUS
  ☆87Updated 6 years ago
• TheRo0T / CAN-USB-STM32
  ☆67Updated 9 years ago
• CBBL / CBBL
  CAN Bus Bootloader for STM32 microcontrollers
  ☆15Updated 13 years ago
• madprogrammer / stm32-can-bootloader
  STM32 CAN-bus bootloader
  ☆78Updated 9 years ago
• GBert / misc
  miscellaneous stuff / unsorted
  ☆99Updated 9 months ago
• DieBieEngineering / DieBieMS-Firmware
  Firmware for the DieBieMS
  ☆55Updated 4 years ago
• walmis / stm32-slcan
  slCAN compatible firmware for STM32f103C8T6
  ☆75Updated 3 years ago
• kobolt / usb-can
  USB-CAN Analyzer Linux Support
  ☆65Updated 10 months ago
• geosmall / UAVCAN-for-STM32-Arduino
  UAVCAN for STM32 Arduino
  ☆42Updated 5 years ago
• ADTL / stm32f4-canopennode
  CANopenNode as used on our Cortex-M4 controllers.
  ☆12Updated 12 years ago
• mocona05 / CAN-BUS-TO-USB-UART-STM32F042-
  CAN-BUS TO USB-UART(STM32F042)
  ☆23Updated 9 years ago
• cvra / can-bootloader
  The bootloader used to flash our CAN-connected boards
  ☆148Updated 2 years ago
• vladisenko / USB-CAN
  Yet another USB-CAN adapter.
  ☆13Updated 3 years ago
• exothink / eXoCAN
  stm32duino CAN Library for the STM32F103 aka Blue Pill
  ☆84Updated last year
• TheDIYGuy999 / Mega_PLC
  An open source Arduino industrial PLC
  ☆44Updated 4 years ago
• lawsonkeith / STM3210E-EVAL_CAN_Networking
  STM32F103C8T6 CAN implementation
  ☆17Updated 9 years ago
• csnol / STM32-OTA
  STM32-OTA on Arduino IDE
  ☆129Updated 2 years ago
• fabiobaltieri / open-usb-can
  Open Source USB to CANBUS interface
  ☆109Updated last year
• cvra / CAN-USB-dongle-fw
  slcan firmware for the CVRA CAN to USB dongle
  ☆37Updated 4 years ago
• karlyamashita / CANable_USB_CAN
  Open source project that uses the CANable hardware from protofusion.org
  ☆43Updated 3 months ago
• marel-keytech / openCANopen
  Open Source CANopen Stack
  ☆62Updated 6 years ago
• MHS-Elektronik / CANcool
  Open Source CAN bus Analyser and Simulation Software
  ☆67Updated 6 months ago
• andreili / STM32-PLC
  The project is open source and open hardware, the purpose of which is to create a PLC based on STM32 MCU's.
  ☆63Updated 7 years ago
• MPaulHolmes / AC-Controller
  This is the software for running an AC INDUCTION OR PERMANENT MAGNET motor with field oriented control.
  ☆52Updated 8 years ago
• McNeight / CAN_Library
  Multiplatform Arduino library for supporting the native CAN controller on Due (SAM3X) and Teensy 3.1 (K2X) as well as MCP2515 through SPI
  ☆96Updated 7 years ago