Alternatives and similar repositories for esp32-modbus-gateway

Users that are interested in esp32-modbus-gateway are comparing it to the libraries listed below

• budulinek / arduino-modbus-rtu-tcp-gateway
  Arduino-based Modbus RTU to Modbus TCP/UDP gateway with web interface. Allows you to connect Modbus RTU slaves (such as sensors, energy m…
  ☆198Updated 6 months ago
• harihanv / esp32-modbus-gateway
  esp32 port of modbus RTU to TCP Arduino gateway
  ☆70Updated 4 years ago
• gmasse / esp-modbus-mqtt
  A Modbus RTU (RS-485) to MQTT Gateway (based on ESP32)
  ☆93Updated last year
• tobiasfaust / SolaxModbusGateway
  Modbus RTU to MQTT Gateway
  ☆95Updated 3 weeks ago
• dzurikmiroslav / esp32-evse
  ESP32 EVSE firmware
  ☆110Updated last week
• softwarecrash / Daly2MQTT
  ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems
  ☆175Updated 2 months ago
• tjhowse / modbus4mqtt
  Modbus TCP <-> MQTT glue. YAML configuration. Robust.
  ☆87Updated last year
• thelsing / knx
  knx stack (TP, IP and RF) for arduino and linux, Can be configured with ETS
  ☆317Updated 3 weeks ago
• reaper7 / SDM_Energy_Meter
  reading SDM72 SDM120 SDM220 SDM230 SDM630 modbus energy meters from arduino (esp8266, esp32, avr)
  ☆258Updated last year
• veista / modbus_bridge
  A simple Modbus RTU to Modbus TCP Bridge that is done with off-the shelf parts utilizing the ESP-8266
  ☆17Updated 2 years ago
• john30 / ebusd-esp
  Firmware for ESP8266 allowing eBUS communication for ebusd (https://github.com/john30/ebusd)
  ☆157Updated last year
• OpenKNX / Kaenx-Creator
  Create your own KnxProd Files with UI.
  ☆91Updated last month
• syssi / esphome-soyosource-gtn-virtual-meter
  ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter
  ☆93Updated 2 weeks ago
• Bettapro / Solar-Tracer-Blynk-V3
  Connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266/ESP32 and monitor using Blynk /Homeassistant/MQTT... .
  ☆57Updated last week
• bertmelis / espMqttClient
  MQTT 3.1.1 client library for the Espressif devices ESP8266 and ESP32 on the Arduino framework.
  ☆118Updated 3 weeks ago
• olliiiver / sml_parser
  Low memory C++ library to parse Smart Message Language (SML) data from smart meters.
  ☆40Updated last year
• eModbus / eModbus
  Modbus library for RTU, ASCII and TCP protocols. Primarily developed on and for ESP32 MCUs.
  ☆472Updated last month
• thelsing / CreateKnxProd
  Simple Gui to create simple knxprod file for ETS.
  ☆60Updated 3 years ago
• diyless / esp32-wifi-thermostat
  ESP32 OpenTherm Wi-Fi Thermostat
  ☆58Updated last year
• ArminJo / JK-BMSToPylontechCAN
  Converts the JK-BMS RS485 data to Pylontech CAN data
  ☆91Updated 6 months ago
• dev-lab / esp-iot-mbus
  M-Bus gateway with web server based on ESP8266 NodeMCU
  ☆26Updated 6 months ago
• envy / esp-knx-ip
  A KNX/IP library for the ESP8266 with Arduino
  ☆145Updated 3 years ago
• DomiStyle / esphome-dlms-meter
  ESPHome component to read out DLMS smart meters via M-Bus
  ☆116Updated last year
• bertmelis / esp32ModbusTCP
  Modbus client for ESP32
  ☆85Updated 4 years ago
• nygma2004 / growatt2mqtt
  Growatt Solar Inverter Modbus Data to MQTT Gateway
  ☆173Updated 2 years ago
• voltlog / Valve-Actuator
  ☆100Updated last year
• shining-man / bsc_fw
  Firmware battery safety controller (BSC)
  ☆137Updated this week
• ai-republic / bms-to-inverter
  Use, monitor and control any battery brand with any inverter! Application to read and monitor data from BMSes and write data to an invert…
  ☆202Updated last week
• thorsten-gehrig / KnxTpUart
  This is the library of the KNX-User-Forum Arduino project initiated by thorsten Gehrig
  ☆57Updated 5 months ago
• syssi / esphome-jbd-bms
  ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE
  ☆183Updated 2 weeks ago