Xinyuan-LilyGO / T-CAN485
☆122Updated last week
Alternatives and similar repositories for T-CAN485:
Users that are interested in T-CAN485 are comparing it to the libraries listed below
- Monitor Canbus traffic☆122Updated 3 weeks ago
- ESP32 based CAN development board☆172Updated 2 years ago
- Bridge between Wifi and CAN. Minimal variant of the ESP32RET. Using ESP32s3☆26Updated 5 months ago
- CAN Reverse engineering tool for ESP32 based boards (specifically EVTV ESP32Due)☆239Updated 2 months ago
- Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy☆102Updated 7 months ago
- Arduino ESP32 library supporting the on-chip CAN module☆306Updated this week
- An ESP32 CAN 2.0B library☆59Updated 3 weeks ago
- JK BMS to PYLON CANBUS Protocol converter☆34Updated 2 years ago
- Converts the JK-BMS RS485 data to Pylontech CAN data☆76Updated 5 months ago
- A ESP32 based interface between CAN-bus and IoT environments.☆40Updated 2 years ago
- Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.☆32Updated last month
- Arduino library for communicating with Daly BMSs over UART☆101Updated last year
- ☆16Updated last week
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆77Updated 3 months ago
- ESP32 bridge allowing Daly Smart BMS to be used with a Sofar inverter/charger (and others that use SMA CANBUS protocol).☆32Updated last year
- MCP2515 CAN interface library for using on esp32/esp8266☆57Updated 3 years ago
- Decode tire pressure monitoring system TPMS BLE 433MHz CC1101 ESP8266 ESP32☆76Updated 2 years ago
- CANbus to mqtt bridge using esp32☆44Updated 3 months ago
- ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems☆161Updated last month
- SimpBMS Documentation☆86Updated 2 years ago
- ESP32 slcan compatible device☆101Updated 3 years ago
- ESP32 EVSE firmware☆89Updated this week
- An Arduino M0 based controller for Webasto C/E Diesel Water Heaters☆51Updated 2 months ago
- ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE☆141Updated 3 weeks ago
- diyBMS v4 code for the ESP32 and new controller hardware☆202Updated this week
- Python script to emulate the outgoing CAN bus traffic from a Pylontech LFP battery pack (48V)☆42Updated 3 years ago
- PCB with ESP32 and CAN bus. For controlling CAN-devices like heatpumps via ESPHome☆28Updated last year
- CAN_Interface for ESP32 (Cannelloni Protocol)☆52Updated 4 years ago
- Experimental - OBD2 to feed custom device via bluetooth☆87Updated 7 months ago
- Common structures and functionality for CAN libraries☆127Updated 11 months ago