kolins-cz / Smart-BMS-Bluetooth-ESP32Links
Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy
☆113Updated 11 months ago
Alternatives and similar repositories for Smart-BMS-Bluetooth-ESP32
Users that are interested in Smart-BMS-Bluetooth-ESP32 are comparing it to the libraries listed below
Sorting:
- ☆62Updated 6 years ago
- Library for working with JBD BMS☆75Updated last year
- ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE☆169Updated this week
- JBD BMS Linux utility☆66Updated 2 months ago
- Just the Arduino Library for Overkill Solar BMSs☆37Updated 2 years ago
- Read and Write Library for Overkill Solar BMSs☆19Updated 2 years ago
- Program for reading data from a Xiaoxiang smart BMS and printing to an OLED display☆21Updated 5 years ago
- Converts the JK-BMS RS485 data to Pylontech CAN data☆88Updated 4 months ago
- ESPHome component to monitor and control a ANT-BMS via UART☆61Updated last week
- ESP32 bridge allowing Daly Smart BMS to be used with a Sofar inverter/charger (and others that use SMA CANBUS protocol).☆33Updated last year
- ☆30Updated 3 years ago
- ☆18Updated 3 years ago
- A very flexible ESP32 power meter / energy meter with SCT-013-0x0, ZMPT101B, ACS712 sensors☆43Updated last year
- Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before a…☆130Updated 4 years ago
- This project is for connecting to EPEver charge controllers over WiFi for viewing running stats and also allows automatic posting of them…☆74Updated last year
- ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems☆172Updated 3 months ago
- JBD BMS and Thornwave bluetooth data monitoring☆47Updated 3 years ago
- Example code to communicate with Huawei R4850G2 Power Supply via CAN☆74Updated last year
- Arduino library for communicating with Daly BMSs over UART☆110Updated last year
- diyBMS v4 code for the ESP32 and new controller hardware☆209Updated 2 months ago
- Python Script for raspberry reading BMS Ant parameters via Bluetooth☆42Updated 4 years ago
- Python code to monitor and log battery data☆107Updated last year
- ☆34Updated last year
- Simple library for Arduino (ESP32) to control a Chinese diesel heater through 433 MHz RF☆98Updated 5 years ago
- Control one or more R4875G1 R4875G5 R4830G2 R4850G2 R4850S1 and adjust Current and Voltage Parameters on HUAWAI R4875G Battery-Charger vi…☆31Updated last week
- reverse-engineered schematics and interface software☆92Updated last year
- Connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266/ESP32 and monitor using Blynk /Homeassistant/MQTT... .☆56Updated 10 months ago
- An Arduino M0 based controller for Webasto C/E Diesel Water Heaters☆54Updated 7 months ago
- ESP32 interface for JBD BMS☆12Updated 3 years ago
- repo with attempts to test connectivity to JK-BMS via BLE☆27Updated 2 years ago