Alternatives and similar repositories for DIY-Linear-Motor

Users that are interested in DIY-Linear-Motor are comparing it to the libraries listed below

• TkkrLab / LinearMotor
  Diy Linear Motor
  ☆114Updated 3 years ago
• VIPQualityPost / lemon-pepper-stepper
  simplefoc all-in-one 50W hybrid stepper + bldc driver
  ☆50Updated last year
• byDagor / Janus-Controller
  The Janus Controller is a Brushless motor driver with an on-board magnetic encoder, a three-phase MOSFET driver, three MOSFET half-bridge…
  ☆127Updated 4 years ago
• wezhunter / ESP32_LinuxCNC_MotionController_RealTime
  ESP32 hardware based real-time LinuxCNC motion controller
  ☆43Updated last year
• makerbase-mks / MKS-SERVO42C
  MKS SERVO42C, an upgraded version of MKS SERVO42B, built-in Field-Oriented control algorithm, position/speed/ torque closed-loop, 4 Half…
  ☆197Updated 2 years ago
• opengalvo / OPAL
  Minimalistic FW for Processing GCode to Galvanometer signals
  ☆99Updated 10 months ago
• KoshiroRobot / FOC-Driver
  ☆65Updated last month
• makerbase-mks / MKS-SERVO42B
  MKS SERVO42B is 3d printer closed loop stepper motor NEMA17 MKS SERVO42 developed by Makerbase that prevents losing steps. CPU is STM32F1…
  ☆176Updated 3 years ago
• MetalMusings / MyOwnEtherCATDevice
  Documentation accompanying the "Make My Own EtherCAT device" video serie on Youtube.
  ☆69Updated 3 weeks ago
• scottalford75 / Remora
  Remora is a free, opensource LinuxCNC component and Programmable Realtime Unit (PRU) firmware to allow LPC176x and STM32F4 micro-controll…
  ☆160Updated last month
• kingoflolz / linear-actuator-hardware
  ☆64Updated 3 years ago
• makerbase-motor / MKS-SERVO57D
  Makerbase MKS SERVO57D NEMA23 closed loop stepper motor Driver FOC quiet and efficient RS485 / CAN
  ☆61Updated 10 months ago
• Rack-Robotics / Powercore-V2.0
  Open-Source wire EDM power supply by Rack Robotics, Inc.
  ☆184Updated 11 months ago
• TheDigital1 / powercore_plus
  This is a Pi Pico-SDK version of the Rack Robotics Powercore FW, with added features, support for GUI, and upgraded sensors
  ☆37Updated 2 years ago
• PixiePlacer / PixiePlacer
  The PixiePlacer is a DIY Pick and Place Machine for SMD Components running OpenPnP.
  ☆109Updated last year
• photonfirmware / photon
  Open-Source firmware for pick and place feeders
  ☆62Updated 2 months ago
• Peter-van-Tol / LiteX-CNC
  Generic CNC firmware and driver for FPGA cards which are supported by LiteX
  ☆71Updated 5 months ago
• markmaker / PushPullFeeder
  All 3d-Printed Tape&Reel Feeder
  ☆79Updated 9 months ago
• grblHAL / drivers
  Driver overview
  ☆35Updated 6 months ago
• sequoia-hope / open_linear_motor
  Design files for a brushless linear motor project I worked on mostly from 2010-2012
  ☆27Updated 4 years ago
• byDagor / Dagor-Brushless-Controller
  The Dagor Controller is a fully integrated tiny solution for brushless-based actuators with wireless capabilities.
  ☆360Updated last month
• ottoragam / Tarocco
  Closed Loop Motor Controller
  ☆134Updated 4 years ago
• Smoothieware / Smoothieboard2
  Hardware files for the Smoothieboard v2, and extension boards
  ☆59Updated last month
• CrabLabsLLC / OpenMD
  ☆142Updated 8 months ago
• phil-barrett / PicoCNC
  Raspberry Pi Pico based grblHAL Controller
  ☆154Updated last year
• phil-barrett / grblHAL-teensy-4.x
  GRBL Header for a Teensy 4
  ☆119Updated 3 weeks ago
• Igitigit2 / SimpleCanLib
  CAN bus library for ESP32 and STM32 G431
  ☆32Updated last year
• NiklasHammerstone / GalvoStep
  Project for building a cheap galvo laser system using Stepper motors and widely available parts.
  ☆56Updated last year
• dsuarezv / GearSolver
  A cycloid gear graphical calculator to design cycloidal drives.
  ☆124Updated 3 years ago
• CarlBugeja / PCB-Motor-v4
  ☆169Updated 2 years ago