Alternatives and similar repositories for buildroot_bouffalo

Users that are interested in buildroot_bouffalo are comparing it to the libraries listed below

• bouffalolab / blwnet_xram
  Linux virtual Ethernet driver and utility enabling BL808 Linux to use on-chip Wi-Fi
  ☆23Updated 2 years ago
• bouffalolab / bl808_linux
  ☆130Updated last year
• basilhussain / ch32v003-bootloader-docs
  A 'missing manual' for the WCH CH32V003 microcontroller factory bootloader
  ☆61Updated 5 months ago
• openbouffalo / buildroot_bouffalo
  Linux Image for the BL808 CPU by Bouffalo Lab
  ☆135Updated last year
• kprasadvnsi / riscv-openocd-wch
  OpenOCD source code for CH32V series MCUs released by Mounriver IDE
  ☆55Updated 3 years ago
• eeucalyptus / ch32v003-temperature
  Using the ch32v003 as a temperature sensor
  ☆18Updated 2 years ago
• openbouffalo / OBLFR
  OpenBouffalo Firmware Repository
  ☆38Updated 2 years ago
• hydrausb3 / hydrausb3_fw
  HydraUSB3 (WCH CH569) open source test firmware / examples / libraries to experiment with streaming / high-speed protocols (USB2 HS, USB3…
  ☆86Updated 2 years ago
• openwch / ch32v20x
  CH32V203 is an industrial-grade enhanced low-power,small-medium capacity general-purpose MCU based on 32-bit RISC-V core
  ☆114Updated last year
• unframework / licheepi-nano-buildroot
  Config files for full Lichee Pi Nano Linux image build
  ☆127Updated last year
• Ebiroll / esp32_blackmagic
  esp32 wifi debugger for ARM Cortex microcontrollers https://github.com/blacksphere/blackmagic
  ☆101Updated 7 months ago
• xyphro / I3CBlaster
  Raspberry pico / RP2040 based USB to I3C converter with Python support
  ☆74Updated last month
• openwch / nfc
  The whole NFC solution (source code and schematic&layout) based on WCH chips
  ☆45Updated 2 years ago
• lonehog / JTAGprobe
  Firmware for Raspberry Pico to work as JTAG debugger using OpenOCD
  ☆69Updated 8 months ago
• jbentham / picowi
  Standalone WiFi driver for the Pi Pico-W
  ☆106Updated 2 years ago
• espressif / esp32c3-direct-boot-example
  Example of ESP32-C3 (rev. 3 and later) "direct boot" feature.
  ☆75Updated 2 years ago
• mkroman / awesome-bouffalo
  A curated list of tooling, documentation and other resources for Bouffalo Lab chips
  ☆60Updated 3 years ago
• bouffalolab / bl_docs
  Datasheets and Reference Manual for BL602/BL808
  ☆155Updated 2 years ago
• 8086net / pico-sexa-uart-bridge
  Raspberry Pi Pico UART-USB-I2C bridge (USB to six UARTs and one I2C)
  ☆66Updated 8 months ago
• aappleby / picorvd
  GDB-compatible RISC-V Debugger for CH32V003 that runs on a Raspberry Pi Pico
  ☆236Updated 10 months ago
• openwch / ch569
  SDK sch&layout reference design and datasheet documention
  ☆65Updated last year
• sipeed / M1s_BL808_example
  M1s_BL808_example
  ☆69Updated 2 years ago
• eeucalyptus / ch32v003-usbpd
  Use the ch32v003 as a usb pd controller
  ☆48Updated last year
• Blinkinlabs / JTAG_hat
  ☆126Updated last year
• holysnippet / pico_eth_doc
  RP2040 Minimal hardware (PIO) Ethernet interface + LwIP TCP/IP stack driver
  ☆116Updated 3 years ago
• steve-m / hsdaoh-rp2350
  High Speed Data Acquisition over HDMI - RP2350 HSTX implementation
  ☆209Updated 3 weeks ago
• wuxx / nanoCH32V003
  ☆84Updated 6 months ago
• ArcaneNibble / wch-uf2
  CH32V UF2 bootloader
  ☆52Updated last year
• SmartArduino / Doiting_BL
  BL602 SDK
  ☆67Updated 4 years ago
• cpq / esputil
  ESP flashing utility
  ☆173Updated 2 years ago