bitcraze / lighthouse-fpga
☆31Updated last year
Related projects: ⓘ
- HTC vive custom tracking rqt plugin☆16Updated 4 years ago
- The BNO080/BNO085 IMU has a combination triple axis accelerometer/gyro/magnetometer packaged with an ARM Cortex M0+ running powerful algo…☆29Updated 10 months ago
- Tiny local positioning system with OpenMV cam☆18Updated 4 years ago
- Arduino sketch for BNO080 9DOF with sensor fusion☆50Updated 3 years ago
- Lighthouse-based tracker using the TS4231☆60Updated 6 years ago
- nRF52 code: handles LightHouse pulse signals measured with TS4231 + IMU☆55Updated 4 years ago
- Teensy3.6 based flight control firmware☆25Updated 4 years ago
- Aceinna Navigation Studio: open-source, embedded development platform for Aceinna IMU hardware. Run custom algorithms and navigation co…☆36Updated 4 months ago
- JTAG/SWD debugger + UART adapter based on the Black Magic Probe firmware☆21Updated last month
- Some information about HTC Vive tracking system v2☆19Updated 4 years ago
- Library to communicate to a IQ Motion Control Module using C++☆12Updated last month
- Open source UAVCAN RTK GPS, F9P, magnetometer, barometer, IMU, buzzer, and safety switch module.☆11Updated last year
- ☆27Updated this week
- ☆25Updated 3 years ago
- This repository contains FPGA code for various projects like Lighthouse Tracking as well as some IP cores. The repository is board-indepe…☆11Updated 3 years ago
- Open AHRS Software/Hardware☆55Updated 6 years ago
- raspilot hardware☆18Updated 9 years ago
- Arduino driver for PMW3901 optical flow sensor☆52Updated last year
- Mahony 3D fusion filter and tilt compensated compass, with sensor calibration code☆42Updated 4 months ago
- Demo code showing how to interface with BNO080 (or FSP200) using an STM32F411 Nucleo dev board.☆30Updated last year
- Arduino library for communicating with the Bosch BMI088 6 axis IMU☆40Updated last year
- Arduino Library for ICM20948 using DMP for i2c and SPI☆42Updated last year
- ☆19Updated 11 years ago
- Open Hardware carrier board supporting modules with Zynq 7000 All Programmable SoC devices.☆52Updated last year
- Invensense 20948 chip working with DMP code for Arduino environment☆41Updated 4 years ago
- DC Motor Controller with CAN Interface. CC-BY 4.0☆12Updated 6 years ago
- Completely open-source, reverse-engineered implementation of a tracked device for the SteamVR virtual reality system.☆57Updated 6 years ago
- Camera board with a pair of OmniVision OV9281 sensors☆47Updated 7 months ago
- DO NOT USE THIS PROJECT - WILL BE SUPERCEDED☆17Updated 6 years ago
- An Arduino Library for the BNO080 IMU combination triple axis accelerometer/gyro/magnetometer packaged with an ARM Cortex M0+ running pow…☆77Updated last year