antmicro / sdi-mipi-bridgeLinks
Antmicro's open source 3G SDI into MIPI CSI-2 converter
☆22Updated 2 years ago
Alternatives and similar repositories for sdi-mipi-bridge
Users that are interested in sdi-mipi-bridge are comparing it to the libraries listed below
Sorting:
- Open Hardware carrier board supporting modules with Zynq 7000 All Programmable SoC devices.☆62Updated 2 years ago
- Antmicro's open hardware 3G SDI into MIPI CSI-2 converter☆61Updated last year
- An open-source Xilinx Kria SOM Carrier for high-speed camera design☆28Updated last year
- Xilinx Zynq SoC based all-in-one quadrocopter flight controller. Stereo 720p side-by-side digital video transmission.☆17Updated 4 years ago
- Video converter based on Lattice CrossLink-NX☆15Updated last year
- MIPI CSI-2 Camera Sensor Receiver V2 Verilog HDL implementation For any generic FPGA. Tested with IMX219 IMX477 on Lattice Crosslink NX w…☆59Updated 9 months ago
- ☆21Updated 10 years ago
- FMC card to allow interfacing Xilinx FPGA boards with Jetson TX2 or TX1 via CSI-2 camera interface☆19Updated 2 years ago
- kintex7 ov13850 fpga mipi camera☆20Updated last week
- Capture images/video from a Raspberry Pi Camera (MIPI CSI-2) with an FPGA☆72Updated 5 years ago
- zynqmp_cam_isp_demo linux软件项目☆21Updated 2 years ago
- MIPI CSI-2 + MIPI CCS Demo☆74Updated 4 years ago
- Adapter board exposing SATA M.2 SSD on FMC board-to-board connector☆14Updated 2 years ago
- 基于Kintex-7 XC7K325T的高性能FPGA功能验证板☆18Updated 5 years ago
- This is a C library to interface with the LiteX Firmware on Thunderscope over PCIe☆11Updated last week
- ☆23Updated 2 years ago
- FPGA based FM radio with traditional IF architecture and digital IQ demodulation☆20Updated last year
- The FPGA design for the FreeSRP's Artix 7 FPGA☆25Updated 8 years ago
- Lattice Crosslink FPGA is programmed to simulate an IMX219 image stream to a Jetson Nano☆15Updated 4 years ago
- Zest is a FMC mezzanine board with 8 ADC channels and 2 DACs☆11Updated last year
- Driver for HDMI to CSI converter lt6911uxc☆63Updated 7 months ago
- "Marble-Mini" Simple FMC carrier board with SFP, 2x FMC, PoE☆22Updated 4 years ago
- RV1106_IPC☆17Updated 3 years ago
- The implementation of AD9371 on KC705☆20Updated 6 months ago
- This repo contains source, Documentation/reference PCB boards for USB3 camera interface with Lattice Crosslink NX FPGA☆18Updated 3 years ago
- SDI interface board for the apertus° AXIOM beta camera☆13Updated 6 years ago
- ☆31Updated 4 years ago
- ☆14Updated 2 years ago
- Streaming video over USB 3.0 using MAX10 FPGA and CYUSB3014 synchronous slave mode.☆22Updated 4 years ago
- SEA-S7_gesture recognition☆17Updated 5 years ago