VirkSaab / Car-Parking-Alarm-SystemLinks
Security alarm system using Arduino Uno R3 microcontroller, Ultrasound sensor HC-SR04 and Arduino IDE 1.6.8. Applications of this system ranges from security systems like automated-safe security systems to car parking systems, Work on a simple system where the distance of object is measured from the ultrasound sensors and if any object is in the…
☆8Updated 8 years ago
Alternatives and similar repositories for Car-Parking-Alarm-System
Users that are interested in Car-Parking-Alarm-System are comparing it to the libraries listed below
Sorting:
- Flexible, lightweight slave-only, measurement profile IEEE 1588 PTP clock synchronization implementation for network enabled MCUs.☆13Updated last month
- STM32 Hiperface Encoder circuit and software☆11Updated last year
- MDX LabPanel - A Scilab-Programmed GUI Control Panel for Roland MODELA MDX-15/20 CNC Machine☆13Updated 4 years ago
- This repository focuses on demonstrating techniques to track kinematics from inertial measurement units (IMUs).☆10Updated 3 years ago
- Precise time sync with SNTP for STM32 platform. A project for Embedded Systems class.☆11Updated 5 years ago
- Industrial Control Module Based on RPI PICO☆14Updated 4 years ago
- OpenIMU - Open Hardware Mini Logger based on ESP32☆42Updated 2 years ago
- A basic Modbus TCP Master example written in C++ on the ESP32 hardware using the CAS Modbus Stack☆11Updated 6 years ago
- Autonomous RC car using Raspberry Pi. Uses picamera data, OpenCV for processing, along with ultrasonic sensor data to drive autonomously.☆15Updated 2 years ago
- ☆14Updated 2 years ago
- Code for the paper Auto-tuning of model-based feedforward controller by feedback control signal in ultraprecision motion systems☆13Updated 4 years ago
- ☆11Updated last year
- ☆9Updated 4 years ago
- EtherCAT slave board uisng LAN9252☆15Updated 8 years ago
- This is a dual channel linear lab power supply, each one capable of 30 V at 500 mA.☆13Updated 6 years ago
- 一个基于ModBus RTU协议的PLC继电器从站☆11Updated 9 years ago
- Breakout board for ICM-20948 with i2c☆17Updated 6 years ago
- STEP FPGA Development Board - Intel MAX10 FPGA☆17Updated 6 years ago
- Nuleo64 EtherCAT Board☆12Updated 8 years ago
- Sensor Fusion Library for ST sensors and microcontrollers☆12Updated 3 years ago
- Very Light-Weight Efficient Onboard Image Processing Library in C☆28Updated 6 years ago
- BlueSync is a time synchronization protocol intended to run on top of Bluetooth Low Energy (BLE).☆11Updated 10 years ago
- Modular system able to assist during driving 🚗, detecting road elements such as traffic lights 🚦 or traffic signs ⛔ and informing the d…☆24Updated 4 years ago
- 🌸 Open source CAN BUS analyzer specific for FOC Drive in PMSM/BLDC☆14Updated 4 years ago
- Sources used to measure the performance of orientation estimation algorithms (2017 version)☆11Updated 2 years ago
- Draws a 3D representation of an IMU's orientation. Developed for Raspberry Pi and OpenGL ES. Works with minimu9-ahrs.☆52Updated 2 years ago
- ESP32 high-speed flash data logger for IMU (accelerometer+gyro+magnetometer), GPS, pressure sensor readings.☆20Updated 5 years ago
- A SLAM-Robot-Controller to drive six-dc-motors with rotary-encoder use RS485/CAN BUS to communicate with Jetson TX2☆11Updated 5 years ago
- AI Drone with embedded GPU (Nvidia Jetson Nano) for computer vision and autonomous flight☆19Updated 3 years ago
- Arduino library to easily control multiple daisy-chained shift registers.☆14Updated 6 years ago