Alternatives and similar repositories for STM32-based-servo-control

Users that are interested in STM32-based-servo-control are comparing it to the libraries listed below

• dccharacter / STM32_Servo_Controller
  STM32-based servo/CNC/3D-printer controller
  ☆44Updated 13 years ago
• EEDrone / Firmware
  飞控固件
  ☆22Updated 8 years ago
• ros2 / ros2_embedded_nuttx
  This repository isn't actively being worked on. If you would like to take over maintainership please open a ticket on https://github.com/…
  ☆74Updated 7 years ago
• jorgeazevedo / xenomai-lab
  A Platform for Digital Real-Time Control.
  ☆15Updated 12 years ago
• TKJElectronics / XV11Lidar_STM32F429
  Neato XV-11 LIDAR connected to an STM32F429IDISCOVERY board for 360-degree range scanning and measurement
  ☆41Updated 11 years ago
• KitSprout / SmartIMU-Nano
  IMU Development Kit，Nano version of SmartIMU
  ☆11Updated 8 years ago
• tudelft / drone_vision
  Very Light-Weight Efficient Onboard Image Processing Library in C
  ☆28Updated 6 years ago
• openmv / openmv-swd
  Serial Wire Debugger Programmer
  ☆11Updated 2 years ago
• dongfang / BGC32
  Open source 3 Axis Gimbal controller firmware
  ☆19Updated 11 years ago
• ginge / OpenServoV4
  OpenServo Version 4
  ☆21Updated 13 years ago
• openrobots-dev / uROSnode
  ☆80Updated 9 years ago
• KitSprout / QCopterMachineVision
  攝像板 MachineVision，使用 STM32F429ZG
  ☆32Updated 9 years ago
• vedderb / QuadcopterSystem
  The hardware and software for our quadcopter system
  ☆28Updated 9 years ago
• robopeak / rp-3d-scanner
  A low cost 3D laser scanner created by RoboPeak
  ☆53Updated 12 years ago
• KitSprout / Camera-MT
  Camera Module，Use MT9V034
  ☆18Updated 9 years ago
• mpaperno / qgroundcontrol_aq
  AutoQuad ground control and setup application for Windows, OSX and Linux.
  ☆23Updated 8 years ago
• ginge / OpenServo
  OpenServo code and applications
  ☆97Updated 10 years ago
• raspilot / Hardware
  raspilot hardware
  ☆18Updated 10 years ago
• dongilc / MJVESC_circular_v0.3
  Circular type VESC firmware based Motor Controller
  ☆18Updated 6 years ago
• jserv / stm32f429-r3d
  small software 3D rendering program on STM32F429-Discovery
  ☆27Updated 11 years ago
• iliasam / STM32F4_phase_laser_rangefinder
  ☆14Updated 2 years ago
• Dark-Guan / AnanasBoard
  ☆28Updated 8 years ago
• psiorx / ADRC
  A set of lego EV3 drivers for hitechnic gyroscope, accelerometer, motors, and wheel encoders used to balance a wheeled inverted pendulum …
  ☆27Updated 9 years ago
• iliasam / OpenLIDAR
  Open Hardware scanning triangulation laser rangefinder
  ☆207Updated 4 years ago
• PX4 / DriverFramework
  Operating system and flight stack agnostic driver framework for POSIX (Linux, NuttX, Mac OS, QNX, VxWorks).
  ☆82Updated 6 years ago
• micro-ROS / NuttX
  Official micro-ROS RTOS
  ☆92Updated 3 years ago
• zarathustr / uORB-freertos
  The Re-Designed uORB Codes by Jin Wu
  ☆29Updated 6 years ago
• jytong / mpu6050Pi
  MPU6050 DMP driver for Raspberry Pi. Add a simple C++ interface, easy to use.
  ☆21Updated 9 years ago
• bitcraze / crazyflie2-stm-bootloader
  Crazyflie 2.0 STM32F4 bootloader
  ☆43Updated 2 years ago
• mrkindustries / bldc
  Brushless DC Motor controller from Benjamin Vedder
  ☆104Updated 8 years ago