Alternatives and similar repositories for Adafruit-BNO08x-PCB

Users that are interested in Adafruit-BNO08x-PCB are comparing it to the libraries listed below

• adafruit / Adafruit_BNO08x
  Arduino library for BNO08x
  ☆74Updated 2 years ago
• adafruit / Adafruit_CircuitPython_BNO08x
  Helper library for the Hillcrest Laboratories BNO080 IMU
  ☆39Updated last month
• sparkfun / SparkFun_BNO080_Arduino_Library
  An Arduino Library for the BNO080 IMU combination triple axis accelerometer/gyro/magnetometer packaged with an ARM Cortex M0+ running pow…
  ☆91Updated 2 years ago
• sparkfun / Qwiic_IMU_BNO080
  The BNO080/BNO085 IMU has a combination triple axis accelerometer/gyro/magnetometer packaged with an ARM Cortex M0+ running powerful algo…
  ☆32Updated 2 years ago
• bolderflight / eigen
  Eigen matrix math library.
  ☆30Updated 2 years ago
• eborghi10 / AS5048A
  A simple SPI library to interface with Austria Microsystem's AS5048A angle sensor
  ☆27Updated 4 years ago
• LiquidCGS / FastIMU
  the IMU library to rule them all (wip)
  ☆188Updated 10 months ago
• sparkfun / SparkFun_BNO08x_Arduino_Library
  An Arduino Library for the BNO08x IMU combination triple axis accelerometer/gyro/magnetometer packaged with an ARM Cortex M0+ running pow…
  ☆31Updated last year
• owennewo / simplefoc_skateboard_g431b
  ☆30Updated 5 years ago
• fm4dd / pi-bno080
  Commandline program for reading a Hillcrest Labs Bosch BNO080 IMU sensor over I2C under Linux
  ☆18Updated 5 years ago
• ZHomeSlice / Simple_MPU6050
  Going Live
  ☆93Updated 7 months ago
• YahboomTechnology / MicroROS-Board
  Micro ROS Control board for Raspberry Pi 5 robot
  ☆20Updated 2 months ago
• ceva-dsp / sh2-demo-nucleo
  Demo code showing how to interface with BNO080 (or FSP200) using an STM32F411 Nucleo dev board.
  ☆44Updated 2 years ago
• simplefoc / Arduino-FOC-dcmotor
  Control DC motors using SimpleFOC's infrastructure
  ☆30Updated last year
• tve / lx16a-servo
  Simple ESP32-Arduino library to operate LX-16A serial servos
  ☆25Updated 2 years ago
• linorobot / ldlidar
  ROS2 package for LDRobotic LD06 Lidar
  ☆35Updated 2 years ago
• ClemensElflein / xesc_firmware
  The code for my custom BLDC controller.
  ☆14Updated last year
• kriswiner / ICM42688
  Collection of Arduino sketches for TDK's combo accel/gyro motion sensor
  ☆38Updated 2 years ago
• jkirsons / BLDC-Driver-IFX007T
  ☆25Updated 4 years ago
• adafruit / Adafruit_CircuitPython_BNO055
  CircuitPython driver for BNO055 absolute orientation sensor
  ☆91Updated 5 months ago
• budryerson / TFLuna-I2C
  Arduino library for the Benewake TFLuna LiDAR distance sensor in the I2C communication mode
  ☆36Updated last year
• m5stack / M5StampFly
  ☆70Updated 9 months ago
• Zubax / opengrab_epm_v3
  OpenGrab Electropermanent Magnet
  ☆35Updated 2 years ago
• AGIRobots / PlanetaryGear-3.5xReducer
  Contains the design, documentation, and implementation details for an additional gearbox compatible with the CyberGear motor. It enhances…
  ☆20Updated last year
• hideakitai / MsgPacketizer
  msgpack based serializer / deserializer + packetize for Arduino, ROS, and more
  ☆88Updated last year
• PCrnjak / S-Drive-Firmware
  S_Drive is small bldc driver based on L6234 Three phase motor driver.
  ☆43Updated last year
• robert-stevenson-1 / BNO085-ROS2-Node
  A ROS2 Compatible node that interfaces with the BNO085 IMU sensor via python
  ☆13Updated 4 months ago
• Framework-Robotics-GmbH / odrive-ros2-node
  ROS2-Node for ODrive
  ☆25Updated 3 years ago
• PaulStoffregen / MotionCal
  Motion Sensor Calibration Tool
  ☆92Updated 5 years ago
• Seeed-Studio / Seeed_Arduino_AS5600
  The library comes with AS5600. Through this library, we can realize read the angles 、get magnetic from a magnet underneath the sensor.
  ☆120Updated 11 months ago