Alternatives and similar repositories for CM6_control_software

Users that are interested in CM6_control_software are comparing it to the libraries listed below

• byDagor / Five_Bar_Parallel_Robot-Janus_Jr
  Janus Jr is a five-bar parallel robot designed to work with brushless motors, Arduino IDE and 3D printed parts.
  ☆24Updated 4 years ago
• rosmo-robot / Rosmo_3D
  3D printing and design files
  ☆16Updated 2 years ago
• PCrnjak / S-Drive-Firmware
  S_Drive is small bldc driver based on L6234 Three phase motor driver.
  ☆43Updated last year
• scuttlerobot / SCUTTLE
  SCUTTLE™: Sensing, Connected, Utility Transport Taxi for Level Environments [An open-source Mobile Robot]
  ☆81Updated last year
• PCrnjak / 3D-printed-Hexapod
  Code and STL files for small 18 servo hexapod.
  ☆31Updated last year
• gouldpa / Triple-Cycloidal-Robot-Arm-Proto-2
  ☆22Updated 5 years ago
• makerspet / makerspet_loki
  Maker's Pet Loki - a 200mm 3D-printed DIY pet robot compatible with Kaia.ai robotics software platform
  ☆47Updated 8 months ago
• Luisonson / LibreServo_v2
  An Open source controller to convert any servo motor to the best smart servo. Servomotor Hack
  ☆30Updated last year
• KoshiroRobot / Simple-Smart-Servo-Driver
  ☆45Updated 9 months ago
• aaedmusa / OpenQDD-V1
  Open source 3D printed Robotic Actuator
  ☆85Updated 2 years ago
• jkirsons / BLDC-Driver-IFX007T
  ☆24Updated 4 years ago
• PCrnjak / Spectral-Micro-BLDC-controller
  Spectral Micro BLDC controller - FOC based, high performance and affordable
  ☆77Updated last week
• T-Kuhn / ESP32-MicroRobotArm
  Micro Robot Arm with ESP32 and 28BY-48 12V steppers
  ☆82Updated 6 years ago
• qwertpas / O32controller
  Miniature closed-loop controller for brushless DC motors
  ☆29Updated last year
• XRobots / ROSremote
  ☆34Updated 3 years ago
• JoLamMaker / ThisArm_Firmware
  G-code enabled firmware for Robot Arms
  ☆33Updated 3 years ago
• simplefoc / Arduino-FOC-dcmotor
  Control DC motors using SimpleFOC's infrastructure
  ☆29Updated last year
• iforce2d / linuxcnc-gcode-server
  Allows connecting to a LinuxCNC installation and executing commands, similar to linuxcncrsh.
  ☆30Updated 7 months ago
• DarrenLevine / TipTap
  A 3d-printed bipedal robot. A low-cost desktop option for semi-direct drive walking research.
  ☆61Updated 4 years ago
• roTechnic / CycloidalDesign
  ☆24Updated 3 years ago
• Igitigit2 / SimpleCanLib
  CAN bus library for ESP32 and STM32 G431
  ☆32Updated last year
• gouldpa / ESP-32-Brushless
  ☆28Updated 3 years ago
• bdring / Tap6x
  A 6 axis CNC machine
  ☆13Updated 5 years ago
• JorgeMaker / NautilusController
  A BLDC controller developed (HardWare + FirmWare) using SimpleFOC that is aimed to be used as a robotic actuator.
  ☆15Updated 2 years ago
• MarginallyClever / sixi-2
  Sixi 2 Robot Arm
  ☆34Updated 3 years ago
• mjbots / pi3hat
  ☆42Updated last week
• Circuit-Digest / MLX90640-Thermal-Camera
  An Open Source Thermal Imaging IR camera that you can build yourserlf
  ☆51Updated 6 months ago
• VIPQualityPost / aioli-foc
  Small, simple closed loop BLDC driver implementing SimpleFOC
  ☆31Updated last year
• mjbots / hoverbot
  Simple balancing hoverboard robot
  ☆49Updated 3 months ago
• juanccilleruelo / SpoonerArm3D
  SpoonereArm3D is a robotic arm with sensors based on arduino.
  ☆14Updated 3 years ago