GearDownForWhat / BalanceBotLinks
The Stupid fast Servo powered balance bot
☆45Updated last year
Alternatives and similar repositories for BalanceBot
Users that are interested in BalanceBot are comparing it to the libraries listed below
Sorting:
- This is the repo for the robot actuator v8 based on an ESP32 as the brains of each robot arm actuator.☆227Updated 4 years ago
- ☆200Updated 3 years ago
- This repository includes the code for my RGB Time Fountain project. Video of the project available at: https://youtu.be/LqMFiVkvxQw☆62Updated 7 years ago
- All the things for RobotX☆126Updated 7 years ago
- Software for controlling and analysing T-Bots (Balancing robots)☆31Updated last year
- Based on the miniKame, modifications to the body of the robot to allow more space, included a ultrasonic sensor. ESP8266 based quadruped …☆29Updated 9 years ago
- Micro Robot Arm with ESP32 and 28BY-48 12V steppers☆82Updated 6 years ago
- STL files and instructions for uStepper Robot Arm Rev 4☆70Updated 4 years ago
- Capers II is a hexapod robot with three degrees of freedom per leg.☆55Updated 7 years ago
- ☆34Updated 3 years ago
- A Conference Badge that Draws #Badgelife☆41Updated 6 years ago
- 6DOF Industrial Robot, vintage style☆147Updated 8 years ago
- The library comes with AS5600. Through this library, we can realize read the angles 、get magnetic from a magnet underneath the sensor.☆114Updated 7 months ago
- miniDog V2 CAD and Code☆63Updated 5 years ago
- ☆201Updated last year
- My take on a SpotMicro with an optimized design for supportfree 3D-printing. It utilizes an ESP32-DevKitC for the low-level control of th…☆349Updated 9 months ago
- uStepper Robot Arm STL files and instruction Revision 3☆94Updated 7 years ago
- faceless clock☆54Updated 7 years ago
- ☆142Updated 11 months ago
- B-ROBOT Arduino self balancing robot from JJROBOTS.com☆114Updated 4 years ago
- ☆108Updated 9 years ago
- Q8 Robot☆172Updated 2 weeks ago
- Library and UI to configure and control LewanSoul LX-16A servos☆66Updated 2 years ago
- This repository contains the code, 3D-printable files and electronics to make my 3D Lidar.☆75Updated 2 years ago
- ☆74Updated last year
- 3D printed self balancing robot using and ESP32 for the brains, MPU6050 for gyros & accelerometres and DRV8825 to drive the 2 servo motor…☆82Updated 7 years ago
- ☆27Updated 6 years ago
- ☆55Updated 5 years ago
- Parallel mechanism for wrist in robotics hand☆55Updated 6 years ago
- ☆236Updated 3 years ago