EmbedME / USBtinLibLinks
Java library for accessing USBtin (USB to CAN interface)
☆18Updated 7 years ago
Alternatives and similar repositories for USBtinLib
Users that are interested in USBtinLib are comparing it to the libraries listed below
Sorting:
- python API for USBtin can interface☆23Updated 2 years ago
- ☆17Updated 9 years ago
- Simple GUI for USBtin (USB to CAN interface)☆42Updated 4 years ago
- uClinux for Cortex-M3 and Cortex-M4☆14Updated 11 years ago
- slcan firmware for the CVRA CAN to USB dongle☆37Updated 4 years ago
- Free Libre Open-Source/-Hardware JTAG/UART adapter based on FTDI2232H☆31Updated 8 years ago
- Michrochip CAN BUS Analyzer firmware☆22Updated 8 years ago
- ARM Bare Metal Widget (arm-bmw) software☆19Updated 8 years ago
- CAN bus gateway over USB☆21Updated 3 years ago
- ☆39Updated last week
- CAN-BUS TO USB-UART(STM32F042)☆23Updated 9 years ago
- Armstart's CMSIS-DAP firmware implementation in gcc and makefile. Note: this is not the original Armstart repo☆26Updated 5 years ago
- Open Source CANopen Stack☆60Updated 5 years ago
- Trying to port the Analog Discovery into libsigrok☆19Updated 10 years ago
- SocketCAN Linux driver for UAB "Rusoku Technologies" TouCAN USB to CAN bus converter☆9Updated 3 years ago
- STM32 CAN library☆8Updated 6 years ago
- A set of python scripts to create dfu files and upload them to stm32 boards☆76Updated 3 years ago
- miscellaneous stuff / unsorted☆97Updated 5 months ago
- Python SWD Debugging library for ST-Link/V2☆65Updated 4 months ago
- ☆52Updated 2 years ago
- A simple CAN to USB bridge for STM32F4☆14Updated 11 years ago
- STM8 port of GNU binutils with link-time unused code elimination☆12Updated 2 years ago
- Simple CAN-over-IP gateway☆28Updated 2 years ago
- libGIS is a collection of utility functions to create, read and write Atmel Generic, Intel HEX8, and Motorola S-Record formatted files.☆51Updated 8 years ago
- A MSD (Mass Storage Device) USB bootloader for a PIC18F47J53 with an external SPI flash chip. I'm writing this primarily for my MPPT Sola…☆12Updated 6 years ago
- Arduino based CAN bus reader and logger for vehicle information important to autocross racers☆14Updated 11 years ago
- Interrupt driven variant of libopencm3's usb_cdcacm example.☆16Updated 7 years ago
- Ethernet-CAN converter board based on STM32F407☆24Updated 3 years ago
- ☆23Updated 9 years ago
- Open Source Hardware Schematics for OpenXC Vehicle Interface☆39Updated 4 years ago