andriy-bilynskyy / STM32-Linux
STM32 project template for development under Linux
☆9Updated 4 years ago
Alternatives and similar repositories for STM32-Linux:
Users that are interested in STM32-Linux are comparing it to the libraries listed below
- In application debugger for ARM Cortex microcontrollers.☆32Updated 8 years ago
- L4：Cortex A5 GSM SoC RDA8810☆24Updated 5 years ago
- Connecting USB-VGA adapter to STM32☆30Updated 2 years ago
- To have platform independent network interfaces over usb which is working with Linux, Windows, Mac OS ect. called RNDIS. This project is …☆33Updated 3 months ago
- ST-link V2 schematic and PCB in kiCAD with initial firmware through UART☆20Updated 3 years ago
- Bluetooth to UART bridge chip☆14Updated 2 years ago
- Buildroot for ido-som2d01 (and similar SSD20xD) based boards.☆11Updated last year
- DFU bootloader for STM32F103, for use with any F103 code and target☆30Updated 8 years ago
- uClinux for Cortex-M3 and Cortex-M4☆14Updated 11 years ago
- Linux for the Hantek DSO2000 series using Buildroot☆30Updated 3 years ago
- STM32 USB device bootloader using DFU class interface☆97Updated 2 months ago
- Longan RV32 Boards Document☆47Updated 5 years ago
- Linux driver for RTL8723DS.☆55Updated last year
- Saleae 1-Wire Analyzer☆11Updated last year
- R2610☆30Updated 7 years ago
- ☆17Updated 3 years ago
- Bootloader firmware for the Maple ARM Cortex-M3 development board from LeafLabs☆24Updated 10 years ago
- Bootloader firmware for the Maple ARM Cortex-M3 development board from LeafLabs☆140Updated 10 years ago
- Tuya IoTOS Embeded SDK WiFi & BLE for BK7231N☆54Updated 9 months ago
- QSPI flashloader(25q128)☆19Updated 3 years ago
- ESP32-IDF Jlink VS Code Debug And Flash Download☆11Updated 2 months ago
- v3s allwinner linux sdk(boot from spi flash)☆27Updated 6 years ago
- Read-only mirror of the official repo at git://sigrok.org/libsigrok. Pull requests welcome. Please file bugreports at sigrok.org/bugzilla…☆19Updated 4 months ago
- A smart fan controller use a STM32 MCU to cooling a LED light . The controller have 3 main function. 1.A GPIO generate a 25KHz PWM signal…☆10Updated 7 years ago
- A fork of the OpenOCD project, used to build the xPack OpenOCD☆59Updated 2 years ago
- USB Power Delivery Protocol Analyzer GUI☆25Updated 3 years ago
- An open source firmware design for DSLogic☆91Updated 10 years ago
- Firmware uploader for ST-Link☆67Updated 11 months ago
- Tools and notes for Rockchip RISC-V MCU.☆23Updated 10 months ago
- Unofficial mirror of GNUK's submodule: Chopstx☆15Updated 3 years ago