Alternatives and similar repositories for arduino-ecu-simulator

Users that are interested in arduino-ecu-simulator are comparing it to the libraries listed below

• ElDominio / ETC_Control
  Arduino Nano based ETC controller implemented with working states
  ☆10Updated 7 years ago
• AmesisProject / AP_ME7.xxTunerMap
  Sofrware to tuning ME7.xx Family
  ☆13Updated 3 years ago
• Autohome2 / dxControl-Gears
  ☆25Updated 8 years ago
• handmade0octopus / ds2
  DS2 K-line library for Arduino and ESP32
  ☆51Updated 9 months ago
• ElDominio / CANforVAGME75
  CANBUS implementation for ME7.5 with Arduino Nano and MCP2515
  ☆20Updated 7 years ago
• nopnop2002 / Arduino-CANBus-Monitor
  mcp2515 canbus module to Monitor Canbus traffic
  ☆42Updated 2 years ago
• spoonieau / OBD2-ECU-Simulator
  Arduino Uno powered OBD2 ECU Simulator 'Stand alone or qt5 GUI control'
  ☆64Updated 5 years ago
• DieselDuz42 / Arduino-CAN-bus-SD-logger
  Arduino script to log CAN bus information to SD card. Mainly focused on J1939.
  ☆25Updated 5 years ago
• garymeg / CanBus_Hacking
  Hacking a Vehicles CanBus
  ☆25Updated 3 years ago
• seishuku / teensycanbusdisplay
  Jetta TDI aux display
  ☆18Updated 6 years ago
• bouletmarc / Arduino_Honda_OBD1_BM-Duino
  This is an Arduino Honda OBD1 ECU datalogger from CN2, also able to ignition cut
  ☆16Updated 9 years ago
• JacekGreniger / stm32-vagcanlogger
  VAGCANLOGGER - KW1281 & VW TP 2.0
  ☆33Updated 12 years ago
• fabiankuffer / arduino-obd2-sim-code
  Arduino OBD2 Simulator
  ☆12Updated 6 years ago
• mintynet / esp32-slcan
  ESP32 slcan compatible device
  ☆105Updated 2 weeks ago
• skpang / Arduino_CAN-Bus_ECU_reader
  ☆50Updated 8 years ago
• ihaque / arduino-ecu-logger
  Arduino-based OBD2 engine monitor and data logger
  ☆38Updated 10 years ago
• AmesisProject / 002-Amesis-Throttle_To_ThrottleBody_Arduino
  Order a motorized throttle body for gasoline engines with an electronic pedal and an arduino Commander un boitier papillon motorisé des m…
  ☆15Updated 6 months ago
• oelprinz-org / BL49SP
  Wideband Lambda Controller with Bosch CJ125
  ☆45Updated 2 years ago
• joesbox / WBO2-Controller
  WBO2 Controller
  ☆16Updated last year
• xerootg / esp32_tp20_datalogger
  VW TP 2.0 Datalogger for the ESP32
  ☆22Updated 3 years ago
• smartgauges / obd2-bt-stm32
  Firmware for the cheapest can sniffer
  ☆39Updated last year
• atc1441 / arduino-mcp2515
  Arduino MCP2515 CAN interface library
  ☆40Updated 5 years ago
• akpc806a / CAN_Bridge
  CAN Bus Bridge / Smart Repeater
  ☆36Updated 10 months ago
• pazi88 / 8Ch-EGT
  8Ch EGT sensor board to be used with aftermarket ECUs
  ☆34Updated last year
• collin80 / A0RET
  CANBus reverse engineering firmware for the Macchina A0
  ☆20Updated last year
• MagnusThome / ESP32_OBD2_Emulator
  Replies to all OBD2 requests with dummy data
  ☆14Updated 2 years ago
• dvjcodec / ECUTeen_3.5
  ECU designed for Speeduino firmware
  ☆35Updated 6 years ago
• autowp / CANreader
  Android CAN client
  ☆67Updated 8 years ago
• Tjeerdie / Peak-And-hold-Driver
  Peak and hold injector driver for low-Z injectors.
  ☆14Updated 3 years ago
• gmenounos / vwcluster
  ☆32Updated 4 months ago