Alternatives and similar repositories for multidisplay

Users that are interested in multidisplay are comparing it to the libraries listed below

• BretStateham / arduino-ecu-simulator
  Arduino ECU Simulator
  ☆21Updated 6 years ago
• skpang / Arduino_CAN-Bus_ECU_reader
  ☆50Updated 8 years ago
• Longan-Labs / Longan_CAN_MCP2515
  Arduino Library for CAN Bed
  ☆28Updated 4 years ago
• atc1441 / CustomCanDecoderBox
  ☆42Updated 5 years ago
• mintynet / esp32-slcan
  ESP32 slcan compatible device
  ☆104Updated last week
• Autohome2 / dxControl-Gears
  ☆25Updated 8 years ago
• merkur2k / MSCan_Gauge
  Megasquirt Gauge using CAN bus.
  ☆35Updated 3 years ago
• collin80 / FirmwareReceiver
  ☆14Updated 9 years ago
• CANBus-Triple / CANBus-Triple-Hardware
  Eagle CAD files for CANBus Triple Hardware
  ☆58Updated 8 years ago
• akpc806a / CAN_Logger
  CAN Bus logger with SD card implemented using ChibiOS
  ☆74Updated 6 years ago
• BennehBoy / LRDuino
  DEPRECATED In car multi gauge system - STM32, SSD1306, MAX31856, ADXL345, ELM327
  ☆25Updated 2 years ago
• smartgauges / obd2-bt-stm32
  Firmware for the cheapest can sniffer
  ☆39Updated last year
• ElDominio / ETC_Control
  Arduino Nano based ETC controller implemented with working states
  ☆10Updated 7 years ago
• connorwm / J1850VPW
  Arduino Code (eventually library) for communicating with J1850 VPW OBD-II equipped cars.
  ☆21Updated 10 years ago
• designer2k2 / EMUcanT4
  ECUMaster EMU CAN Stream Reader Arduino Teensy 3 and 4 Library
  ☆11Updated 3 years ago
• MWP / megasquirt-dash-display
  Dash display project for Megasquirt ECUs based on ESP32 and EVE2
  ☆35Updated 6 years ago
• FL0WL0W / EFIGenie
  An open source engine management
  ☆29Updated 11 months ago
• BennehBoy / LRDuinoTD5
  In car multi gauge system - STM32, SSD1306, MAX31856, L9637D, TD5 ECU
  ☆29Updated 2 years ago
• kangassu / j1850_reader
  OBD2 reader with Arduino Uno supporting SAE J1850 VPW protocol
  ☆14Updated 10 years ago
• micahpearlman / zero-o2-simulator
  An 02/lambda eliminator/simulator to tune an engine ECU in closed loop mode.
  ☆17Updated 10 years ago
• collin80 / A0RET
  CANBus reverse engineering firmware for the Macchina A0
  ☆20Updated last year
• handmade0octopus / ds2
  DS2 K-line library for Arduino and ESP32
  ☆51Updated 9 months ago
• darkspr1te / elm327_clone
  ELM327 firmware for pic18f25k80 chip from china clone OBD2 diag boxes
  ☆43Updated 8 years ago
• spoonieau / OBD2-ECU-Simulator
  Arduino Uno powered OBD2 ECU Simulator 'Stand alone or qt5 GUI control'
  ☆64Updated 5 years ago
• Metaln00b / NodeMCU-BlackBox
  ESP8266 based CAN-Bus Diagnostic Tool
  ☆43Updated 4 years ago
• bouletmarc / Arduino_Honda_OBD1_BM-Duino
  This is an Arduino Honda OBD1 ECU datalogger from CN2, also able to ignition cut
  ☆16Updated 9 years ago
• thomasonw / avr_can
  Object oriented canbus library for Atmel AVR CPUs used with the Arduino IDE.
  ☆43Updated 3 years ago
• MHS-Elektronik / CANcool
  Open Source CAN bus Analyser and Simulation Software
  ☆67Updated 8 months ago
• roboterclubaachen / usb2can
  ☆51Updated 6 years ago
• nopnop2002 / Arduino-CANBus-Monitor
  mcp2515 canbus module to Monitor Canbus traffic
  ☆42Updated 2 years ago