mkirbst / lupo-gti-tripcomputer-kw1281Links
A tripcomputer for VW Lupo GTI using kw1281 protocoll
☆27Updated 8 years ago
Alternatives and similar repositories for lupo-gti-tripcomputer-kw1281
Users that are interested in lupo-gti-tripcomputer-kw1281 are comparing it to the libraries listed below
Sorting:
- Arduino / ESP / RPi Pico library integrating the proprietary VAG Key-Word 1281 protocol (KWP1281/KW1281)☆61Updated 9 months ago
- Arduino Nano based ETC controller implemented with working states☆10Updated 6 years ago
- Device based on Arduino to play with VAG KWP1281☆119Updated 7 years ago
- Display information of your KW1281 K-Line VAG vehicle on a display controlled by an Arduino Uno (Or similar).☆33Updated 10 months ago
- DS2 K-line library for Arduino and ESP32☆49Updated 4 months ago
- FIS Control for the masses.☆48Updated 7 years ago
- Android CAN client☆61Updated 8 years ago
- CANBUS implementation for ME7.5 with Arduino Nano and MCP2515☆20Updated 6 years ago
- Sofrware to tuning ME7.xx Family☆13Updated 3 years ago
- Arduino firmware for Sardine CAN (Open Source J2534 device)☆84Updated 10 years ago
- Firmware for the cheapest can sniffer☆38Updated last year
- OBD2 K-line Reader (ISO9141 and ISO14230) with microcontrollers like ESP32, Arduino☆115Updated last week
- Arduino ECU Simulator☆20Updated 6 years ago
- An Arduino-powered automotive gauge using OBDII.☆10Updated 4 years ago
- An Arduino sketch for controlling a Bosch LSU 4.9 Wideband Lambda sensor with minimal parts☆81Updated 11 years ago
- VOLVO Driver Distraction Display :)☆66Updated 3 years ago
- VAGCANLOGGER - KW1281 & VW TP 2.0☆33Updated 11 years ago
- Jetta TDI aux display☆18Updated 5 years ago
- 8Ch EGT sensor board to be used with aftermarket ECUs☆33Updated last year
- Megasquirt Gauge using CAN bus.☆35Updated 3 years ago
- ☆22Updated 7 years ago
- arduino library for remote controling V.A.G. radios☆11Updated 4 years ago
- This is an Arduino Honda OBD1 ECU datalogger from CN2, also able to ignition cut☆15Updated 8 years ago
- Checksum/CRC checker/corrector for Motronic ME7.1 firmware images. Download binaries here:☆84Updated 4 months ago
- ☆50Updated 2 years ago
- Speeduino compatible engine control unit (ECU) based around black STM32F407VET6 board.☆50Updated last year
- This repo for using your Arduino with MCP2515 CAN Interface and CANHacker software☆52Updated 4 years ago
- Arduino Uno powered OBD2 ECU Simulator 'Stand alone or qt5 GUI control'☆58Updated 5 years ago
- Wideband Lambda Controller with Bosch CJ125 and CAN-Bus Interface☆29Updated last year
- ESP32 based steering wheel adapter for Peugeot and Citroen cars☆36Updated 5 years ago