Alternatives and similar repositories for OBD2-ECU-Simulator

Users that are interested in OBD2-ECU-Simulator are comparing it to the libraries listed below

• autowp / CANreader
  Android CAN client
  ☆61Updated 7 years ago
• handmade0octopus / ds2
  DS2 K-line library for Arduino and ESP32
  ☆48Updated 4 months ago
• Spartelfant / ELM327-BT
  ELM327-based OBD-II Bluetooth interface
  ☆80Updated 5 years ago
• mintynet / esp32-slcan
  ESP32 slcan compatible device
  ☆101Updated 3 years ago
• darkspr1te / elm327_clone
  ELM327 firmware for pic18f25k80 chip from china clone OBD2 diag boxes
  ☆40Updated 7 years ago
• coniferconifer / ESP32-ECU-emulator
  ECU emulator by ESP32 with TJA1050 for OBD2 print test
  ☆53Updated last year
• atc1441 / CustomCanDecoderBox
  ☆42Updated 5 years ago
• skpang / Arduino_CAN-Bus_ECU_reader
  ☆50Updated 8 years ago
• danielkucera / esp32-can
  ☆32Updated 2 years ago
• atc1441 / arduino-mcp2515
  Arduino MCP2515 CAN interface library
  ☆39Updated 5 years ago
• nopnop2002 / Arduino-CANBus-Monitor
  mcp2515 canbus module to Monitor Canbus traffic
  ☆39Updated last year
• qnx425 / ELM327SLCAN
  ELM327 based vehicle's CAN bus sniffer
  ☆64Updated 6 years ago
• BretStateham / arduino-ecu-simulator
  Arduino ECU Simulator
  ☆20Updated 6 years ago
• omarKmekkawy / Arduino_CANHacker
  This repo for using your Arduino with MCP2515 CAN Interface and CANHacker software
  ☆52Updated 4 years ago
• muki01 / OBD2_K-line_Reader
  OBD2 K-line Reader (ISO9141 and ISO14230) with microcontrollers like ESP32, Arduino, Raspberry PI Pico
  ☆104Updated last week
• autowp / can-usb
  Arduino sketch for CAN-BUS adapter
  ☆105Updated 9 years ago
• NewTec-GmbH / esp32-can-iot
  A ESP32 based interface between CAN-bus and IoT environments.
  ☆41Updated 2 years ago
• seishuku / teensycanbusdisplay
  Jetta TDI aux display
  ☆18Updated 5 years ago
• PhilippFux / ESP32_CAN_Interface
  CAN_Interface for ESP32 (Cannelloni Protocol)
  ☆55Updated 4 years ago
• seishuku / stm32_swc
  CANbus steering wheel controls for VW/Audi using STM32F429-Discovery
  ☆16Updated 10 years ago
• bouletmarc / Arduino_Honda_OBD1_BM-Duino
  This is an Arduino Honda OBD1 ECU datalogger from CN2, also able to ignition cut
  ☆15Updated 8 years ago
• Metaln00b / NodeMCU-BlackBox
  ESP8266 based CAN-Bus Diagnostic Tool
  ☆43Updated 3 years ago
• JacekGreniger / stm32-vagcanlogger
  VAGCANLOGGER - KW1281 & VW TP 2.0
  ☆33Updated 11 years ago
• TheBigBadWolfClub / GTTurboEcu
  Arduino ODBII ELM327 Emulator - Allows Arduino to act as an OBD2 ELM327 device and responde to PID requests
  ☆64Updated last year
• Autohome2 / dxControl-Gears
  ☆22Updated 7 years ago
• bri3d / esp32-isotp-ble-bridge
  ESP32-IDF based BLE<->ISO-TP bridge targeting Macchina A0 hardware
  ☆39Updated 2 years ago
• collin80 / can_common
  Common structures and functionality for CAN libraries
  ☆135Updated last year
• dedalqq / esp32-mcp2515
  MCP2515 CAN interface library for using on esp32/esp8266
  ☆64Updated 4 years ago
• garymeg / CanBus_Hacking
  Hacking a Vehicles CanBus
  ☆24Updated 3 years ago
• nopnop2002 / esp-idf-CANBus-Monitor
  Monitor Canbus traffic
  ☆128Updated 2 months ago