Alternatives and similar repositories for Sunray

Users that are interested in Sunray are comparing it to the libraries listed below

• Ardumower / ardumower
  Develop an open source robotic lawn mower (HW+SW reference platform)
  ☆262Updated 3 years ago
• EinEinfach / CaSSAndRA
  Cascaded sunray server and rover application
  ☆33Updated 3 months ago
• cloudn1ne / Mowgli
  YardForce GForce Mainboard RE
  ☆50Updated 2 years ago
• REPALphilread / ReP_AL-3D-Lawn-Mower
  Code and Other for the ReP_AL Lawn Mower
  ☆110Updated last year
• cedbossneo / openmower-gui
  ☆32Updated last week
• Damme / LandLord
  Opensource firmware for Worx robotic mower model Landroid WG79X.XX
  ☆144Updated last year
• hoverboard-robotics / hoverboard-firmware-hack-FOC
  With Field Oriented Control (FOC)
  ☆52Updated 2 years ago
• maland16 / daly-bms-uart
  Arduino library for communicating with Daly BMSs over UART
  ☆110Updated last year
• fvilmos / power_meter_mqtt
  esp32 power meter for sensors with pulse output. Implements MQTT for status reporting. Accurate and easily can be integrated with Home Au…
  ☆31Updated 2 years ago
• dreadnought / python-daly-bms
  Python module for Daly BMS devices
  ☆101Updated last year
• ClemensElflein / open_mower_ros
  ☆573Updated this week
• arhi / EthernetSPI2
  Allow ESP32-CAM module to talk to W5500 Ethernet module trough HSPI as SPI (VSPI) pins are used to connect the camera module
  ☆61Updated 5 years ago
• cedbossneo / Mowgli
  YardForce GForce Mainboard RE
  ☆20Updated last month
• stuartpittaway / diyBMSv4ESP32
  diyBMS v4 code for the ESP32 and new controller hardware
  ☆209Updated 2 months ago
• openenergymonitor / emontx-3phase
  emonTx 'approximate' 3-phase firmware
  ☆21Updated 2 years ago
• voltlog / Valve-Actuator
  ☆101Updated last year
• PaddyCube / WirelessWeather
  Software to my 3D printed wireless weather station
  ☆36Updated 2 years ago
• fotherja / EV_Charger
  Arduino Uno Code for EV Charger
  ☆154Updated last year
• Savjee / EmonLib-esp32
  Electricity monitoring library - install in Arduino IDE's libraries folder then restart the IDE
  ☆72Updated last year
• stuartpittaway / diyBMSv4Code
  Software for diyBMS v4
  ☆150Updated 11 months ago
• yuri-rage / ArduRover_Mower
  ☆23Updated 2 years ago
• bres55 / Smart-BMS-arduino-Reader
  ☆62Updated 6 years ago
• rakhmaevao / JbdBms
  Library for working with JBD BMS
  ☆74Updated last year
• OBJEX-Labs / Smart-DoorWindow-sensor
  Open source Smart door/window sensor. ELPMs based with a custom power latch to obtain a deep sleep mode current of (1-100nA).
  ☆94Updated 4 months ago
• syssi / esphome-ant-bms
  ESPHome component to monitor and control a ANT-BMS via UART
  ☆61Updated 3 weeks ago
• softwarecrash / Daly2MQTT
  ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems
  ☆172Updated 3 months ago
• r0oland / ESP32_mini_KiCad_Library
  KiCad symbol and footprint for the ESP32 Mini, the ESP32 clone of the Wemos D1 mini with more pins and more power!
  ☆98Updated 3 years ago
• strange-v / PowerMonitor
  Yet another device that monitors power, current, voltage, frequency, power factor, and energy. The live data is available on a screen or …
  ☆16Updated last year
• ClayBuilds / Gumption-Trap-
  This project is an autonomous solar powered boat which drives around following gps coordinates and plots the depth of water with sonar
  ☆75Updated 2 years ago
• Bettapro / Solar-Tracer-Blynk-V3
  Connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266/ESP32 and monitor using Blynk /Homeassistant/MQTT... .
  ☆56Updated 10 months ago