Alternatives and similar repositories for motherboard:

Users that are interested in motherboard are comparing it to the libraries listed below

• Jana-Marie / USB-PD-Firmware
  USB-PD firmware for the stm32f072 - forked from https://git.clayhobbs.com/pd-buddy/pd-buddy-firmware
  ☆30Updated 5 years ago
• cortexprog / cortexproghw
  ☆18Updated 4 years ago
• jrsikken / ElectronicLoadR2
  Hardware of Jasper's Electronic Load R2
  ☆21Updated 6 years ago
• esden / KiBus
  KiCad bus length matching script.
  ☆30Updated 9 months ago
• mattvenn / ws2812-core
  verilog core for ws2812 leds
  ☆32Updated 3 years ago
• gregdavill / ArcticKoala
  Development board for Lattice Crosslink-NX 72QFN
  ☆28Updated 4 years ago
• drandyhaas / oshw-active-probe
  2GHz single-ended active probe design
  ☆16Updated 4 months ago
• smdprutser / SWM050
  ☆19Updated 6 years ago
• DangerousPrototypes / Bus_Pirate_Ultra
  Just messing with an FPGA
  ☆25Updated 5 years ago
• mwelling / rp2040-pmod
  RP2040 MCU based PMOD
  ☆20Updated 4 months ago
• antmicro / riscv-badge-hw
  RISC-V Electronic Badge open source hardware project
  ☆17Updated last year
• ericwazhung / avr-lvds-lcd
  Drive an old laptop display from an 8-bit AVR microcontroller
  ☆20Updated 9 years ago
• gregdavill / gsd-kicad-libs
  GsD style kicad Libraries
  ☆11Updated 5 years ago
• DangerousPrototypes / BusPirateUltraHDL
  Verilog for the Bus Pirate Ultra FPGA
  ☆26Updated 5 years ago
• Jana-Marie / stm32f072-USB-PD
  stm32f072 USB-PD standalone firmware
  ☆16Updated 5 years ago
• emeb / f303_ice5
  ☆20Updated 8 years ago
• DangerousPrototypes / Sick_of_Beige
  ☆28Updated 9 years ago
• dl3yc / fx2fw-sdcc
  FX2 replacement for USB-Blaster from http://fpga4u.epfl.ch/wiki/FX2
  ☆22Updated 10 years ago
• arturo182 / tinyuf2
  An open source cross-platform UF2 bootloader based on the TinyUSB library
  ☆27Updated 4 years ago
• LibreSolar / 5uh-dc-lisn
  5uH DC LISN (-10 dB attenuation)
  ☆18Updated 5 years ago
• MegabytePhreak / scope-footswitch
  Oscilloscope to footswitch interface for run control using USBTMC
  ☆19Updated 4 years ago
• Breadstick-Innovations / M4-Breadstick
  A long and thin development board, designed to keep the number and length of jumper wires to a minimum. Runs Circuit Python on Microchip …
  ☆14Updated last year
• lujji / blackmagic
  In application debugger for ARM Cortex microcontrollers.
  ☆32Updated 8 years ago
• adafruit / M.2
  Discussion, files, spec, and more for a M.2 standard for makers
  ☆33Updated 4 years ago
• Spritetm / hadbadge2019_pcb
  PCB artwork for the Hackaday Supercon 2019 badge
  ☆56Updated 5 years ago
• cortexprog / cortexprogfw
  ☆27Updated 4 years ago
• compuphase / KiCad-Librarian
  A library manager for KiCad, with a template-driven generation of symbols, footprints and 3D models.
  ☆41Updated 6 years ago
• kaktus85 / MightyWattR3
  Resources for MightyWatt R3 electronic load
  ☆31Updated last year
• machdyne / pnp
  Open-Source Pick and Place Machines
  ☆16Updated 6 months ago
• gcormier / kicad-pcbway
  This project template has pre-populated values in the PCB editor for the PCBWay minimums for their cheapest offering.
  ☆32Updated 6 years ago