vorpalrobotics / VorpalHexapod
Arduino code for both the Vorpal Hexapod and Vorpal Hexapod Gamepad.
☆139Updated 3 years ago
Alternatives and similar repositories for VorpalHexapod:
Users that are interested in VorpalHexapod are comparing it to the libraries listed below
- ☆105Updated 9 years ago
- ESP8266 based quadruped with 8DOF and oscillator based gaits.☆385Updated 7 years ago
- 3d printable Robot arm☆40Updated 7 years ago
- MiniPlan V6☆27Updated 4 years ago
- An 18 DOF Hexpod project using LinkIt Smart 7688 + PCA9685☆72Updated 8 years ago
- New and improved version of our Balancing Robot B-ROBOT☆85Updated 7 years ago
- Arduino Quadruped Robot, Spider Robot☆105Updated 9 years ago
- Lynxmotion Phoenix code ported to Trossen PhantomX☆96Updated 7 years ago
- Antdroid robot ROS repository☆68Updated 8 years ago
- B-ROBOT Arduino self balancing robot from JJROBOTS.com☆109Updated 4 years ago
- quadrupedal robot using esp32☆45Updated last month
- This is the repo for the robot actuator v8 based on an ESP32 as the brains of each robot arm actuator.☆224Updated 4 years ago
- 3D printed self balancing robot using and ESP32 for the brains, MPU6050 for gyros & accelerometres and DRV8825 to drive the 2 servo motor…☆81Updated 7 years ago
- Versión del MiniKame original (https://github.com/JavierIH/miniKame) adaptada a servos sg90, arduino nano, bateria lipo y controlado por …☆21Updated 8 years ago
- Software for a 3D Printed Robot Arm☆125Updated 4 years ago
- An open-source and fully hackable biped robot.☆49Updated 8 years ago
- Based on the miniKame, modifications to the body of the robot to allow more space, included a ultrasonic sensor. ESP8266 based quadruped …☆27Updated 8 years ago
- STL files and instructions for uStepper Robot Arm Rev 4☆66Updated 3 years ago
- Marlin Delta firmware with autocalibration updates☆139Updated 9 years ago
- Repository of Community Robot Arm Documents☆173Updated 2 years ago
- Code for a hexapod robot☆86Updated 5 years ago
- ☆126Updated 4 months ago
- A Grbl_ESP32CNC Controller for MPCNC☆87Updated 2 years ago
- The world's first printable open-source humanoid, starter kit.☆286Updated 4 years ago
- Grbl ver 1.1f.20170131 with XYZ Unipolar Stepper Support (28byj-48)☆104Updated 4 years ago
- WIP: ESP32 powered robot dog, quadruped robot. This is just code, hardware in the other repositories☆115Updated 2 years ago
- uStepper Robot Arm STL files and instruction Revision 3☆88Updated 7 years ago
- ☆187Updated 3 years ago
- My take on a SpotMicro with an optimized design for supportfree 3D-printing. It utilizes an ESP32-DevKitC for the low-level control of th…☆332Updated 2 months ago
- PLEN2's 3D model data implemented by Autodesk Fusion 360.☆45Updated 2 years ago