Alternatives and similar repositories for BMSCtl:

Users that are interested in BMSCtl are comparing it to the libraries listed below

• juamiso / ANT_BMS
  Python Script for raspberry reading BMS Ant parameters via Bluetooth
  ☆40Updated 4 years ago
• bres55 / Smart-BMS-arduino-Reader
  ☆62Updated 5 years ago
• rakhmaevao / JbdBms
  Library for working with JBD BMS
  ☆71Updated last year
• stuartpittaway / diyBMS-CurrentShunt
  Isolated current, voltage and SOC monitor for battery banks up to 85V
  ☆52Updated last year
• roccotsi2 / esp32-smart-bms-simulation
  A simple simulation of the Daly Smart BMS for ESP32 via bluetooth BLE
  ☆11Updated 9 months ago
• kolins-cz / Smart-BMS-Bluetooth-ESP32
  Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy
  ☆104Updated 7 months ago
• damienmaguire / Lexus-GS450H-Inverter-Controller
  Opensource controller for the Lexus GS450H Hybrid inverter and gearbox
  ☆20Updated 3 years ago
• Jakeler / bms-parser
  Binary protocol parser for the smart BMS from LTT Power
  ☆53Updated 2 years ago
• scttnlsn / cell-monitor
  Battery cell monitor and balancer
  ☆34Updated 6 years ago
• Tom-evnut / TeslaBMSV2
  ☆40Updated last year
• botaneta / JKbms_Emu_Pylon
  Emulación del protocolo CANBUS de Pylontech, para comunicación con inversores fotovoltaicos, usando un ESP32
  ☆11Updated 9 months ago
• Tom-evnut / SimpBMS
  SimpBMS Documentation
  ☆86Updated 2 years ago
• FurTrader / Overkill-Solar-BMS-Arduino-Library
  Just the Arduino Library for Overkill Solar BMSs
  ☆35Updated 2 years ago
• meteosat007 / solar-pylontech
  How to connect to a Sofar HYD3600 Inveter and 2 Pylontech US3000 batteries
  ☆19Updated 4 years ago
• stuartpittaway / diyBMSv4Leaf
  diy BMS version 4 for Nissan Leaf cells
  ☆20Updated 4 years ago
• Tom-evnut / BMWI3BMS
  SIMPBMS code for I3 Modules
  ☆43Updated last year
• jamiejones85 / ESP32-BMS
  An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.
  ☆15Updated 2 years ago
• loopyengineeringco / Daly2Sofar
  ESP32 bridge allowing Daly Smart BMS to be used with a Sofar inverter/charger (and others that use SMA CANBUS protocol).
  ☆32Updated last year
• tvixen / 4KW-230V-Inverter
  With these schematics and PCB's, it's possible to create a 230V AC 4KW inverter. The main processor is based on Arduino Nano, with help f…
  ☆58Updated 2 years ago
• stuartpittaway / diyBMSv4Code
  Software for diyBMS v4
  ☆146Updated 7 months ago
• sw-home / FHEM-BluetoothSmartBMS
  Get readings from the Bluetooth Smart BMS from https://www.lithiumbatterypcb.com/ in FHEM
  ☆14Updated 3 years ago
• SunshadeCorp / can-service
  Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.
  ☆32Updated 2 months ago
• ArminJo / JK-BMSToPylontechCAN
  Converts the JK-BMS RS485 data to Pylontech CAN data
  ☆77Updated 2 weeks ago
• maland16 / daly-bms-uart
  Arduino library for communicating with Daly BMSs over UART
  ☆101Updated last year
• MartinStokroos / openMicroInverter
  An open hardware platform for experimenting with DC-to-AC conversion, power and energy metering and grid tie inverters.
  ☆66Updated last year
• jsphuebner / tumanako-inverter-fw-bootloader
  ☆10Updated last year
• craigpeacock / Huawei_R4850G2_CAN
  Example code to communicate with Huawei R4850G2 Power Supply via CAN
  ☆66Updated last year
• OpenSourceEBike / BMSBattery_S_controllers_firmware
  ☆63Updated 3 years ago
• LibreSolar / solarduino-li-ion
  Solar charge controller with integrated 12 V Li-Ion BMS
  ☆15Updated 6 years ago
• damienmaguire / BMW_SBox
  Reverse Engineering of the BMW SBox for use in ev conversion projects
  ☆11Updated last year