Alternatives and similar repositories for uCNC

Users that are interested in uCNC are comparing it to the libraries listed below

• grblHAL / core
  grblHAL core code and master Wiki
  ☆459Updated this week
• bdring / 6-Pack_CNC_Controller
  ☆318Updated 2 years ago
• terjeio / grblHAL
  This repo has moved to a new home https://github.com/grblHAL
  ☆231Updated 2 years ago
• terjeio / ioSender
  A GCode Sender for Grbl and grblHAL written in C# (Windows only).
  ☆265Updated 2 months ago
• Schildkroet / Candle2
  GRBL control interface in Qt.
  ☆226Updated last month
• scottalford75 / Remora
  Remora is a free, opensource LinuxCNC component and Programmable Realtime Unit (PRU) firmware to allow LPC176x and STM32F4 micro-controll…
  ☆166Updated last week
• fra589 / grbl-Mega-5X
  5/6 Axis version of Grbl, the open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C tha…
  ☆380Updated last year
• gnea / grbl-Mega
  An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on an Arduino Me…
  ☆515Updated 3 years ago
• Schildkroet / GRBL-Advanced
  Grbl-Advanced is a no-compromise, high performance, low cost alternative for CNC milling. This version of Grbl runs on a STM32F411RE / ST…
  ☆300Updated last year
• OpenBuilds / OpenBuilds-CONTROL
  OpenBuilds CONTROL: Download from https://software.openbuilds.com
  ☆238Updated 8 months ago
• Sienci-Labs / gsender
  Connect to and control grbl and grblHAL-based CNCs with ease
  ☆299Updated this week
• makerbase-mks / MKS-DLC32
  MKS DLC32 motherboard kit, which is an offline engraving master control kit developed for desktop engraving machines. The hardware is equ…
  ☆429Updated last month
• robomechs / 6-AXIS-USBCNC-GRBL
  This repository is based on https://github.com/usbcnc/grbl which in turn is based on https://github.com/gnea/grbl
  ☆219Updated 5 years ago
• wezhunter / ESP32_LinuxCNC_MotionController_RealTime
  ESP32 hardware based real-time LinuxCNC motion controller
  ☆52Updated last year
• phil-barrett / grblHAL-teensy-4.x
  GRBL Header for a Teensy 4
  ☆127Updated last month
• OpenBuilds / OpenBuilds-CAM
  Online CNC CAM System
  ☆339Updated 10 months ago
• martin2250 / OpenCNCPilot
  autolevelling gcode-sender for grbl
  ☆412Updated 9 months ago
• kcjengr / probe_basic
  User interface for the LinuxCNC machine control.
  ☆122Updated last week
• mstrens / grbl_controller_esp32
  grbl controller for esp32
  ☆203Updated 2 years ago
• fra589 / cn5X
  cn5X++ is a new 5/6 axis Grbl control panel to implement all the grbl-Mega-5X capabilities.
  ☆83Updated last year
• synthetos / g2
  g2core - The Next Generation
  ☆671Updated 2 years ago
• grblHAL / drivers
  Driver overview
  ☆39Updated 2 months ago
• grblHAL / ESP32
  grblHAL driver for ESP32
  ☆120Updated last week
• Expatria-Technologies / Flexi-HAL
  Expatria Technologies GRBLHAL and LinuxCNC (and more!) CNC control board.
  ☆98Updated 6 months ago
• AlexmagToast / LinuxCNC_ArduinoConnector
  This Projekt enables you to connect an Arduino to LinuxCNC and provides as many IO's as you could ever wish for. This Software is used as…
  ☆96Updated 6 months ago
• SourceRabbit / RabbitGRBL
  Professional grade, 100% GRBL compatible motion control firmware for the ESP32
  ☆70Updated this week
• meerk40t / meerk40t
  Hackable Laser software for K40 / GRBL / Fibre Lasers
  ☆366Updated this week
• thomast777 / grbl32
  GRBL 1.1f CNC Controller forked/ported to STM32 ARM : STM32F103 and STM32F407
  ☆221Updated 5 years ago
• watterott / SilentStepStick
  Stepper Motor Driver based on a Trinamic TMC2100 / TMC2130 / TMC2208 / TMC2209 / TMC5160.
  ☆397Updated 3 years ago
• grblHAL / RP2040
  grblHAL driver for RP2040/RP2350 (Pi Pico, Pi Pico2 etc)
  ☆155Updated this week